The LaboTex Reference:

• K.Pawlik, P.Ozga: "LaboTex: The Texture Analysis Software",'Göttinger Arbeiten zur Geologie und Paläontologie', SB4, 1999.

The ADC Method - Main References:

• K.Pawlik - phys.stat.sol.(b) 134 (1986), p.477, "Determination of the Orientation Distribution Function from Pole Figures in Arbitrarily Defined Cells" Abstract ,
• K.Pawlik, J.Pospiech - Proc. of Int. Workshop, Clausthal-Zellerfeld, Germany, (1986), p127
• K.Pawlik, J.Pospiech, K.Lucke - Proc. of ICOTOM-8, Santa Fe, USA, (1987), p105,"The Development of a New Direct Method of ODF Reproduction From Pole Figures and its Testing with the Help of Model Functions"
• K.Pawlik, W.Truszkowski, J.Pospiech, T.Pawlik - Proc. of ICOTOM-8, Santa Fe , USA (1987), p531
• K.Pawlik, J.Pospiech, K.Lucke - Proc. of ICOTOM-9, Avignon , France, (1990), p25, "The ODF approximation from pole figures with the aid of the ADC-method".
• K.Pawlik - Proc. of EPDIC-2, Enschede, The Netherlands, (1992), p151
• K.Pawlik - Proc. of ICOTOM-10, Clausthal-Zellerfeld, Germany, (1993), p401
• H.R.Wenk, K Pawlik, J Pospiech and J.S Kallend - Deconvolution of superposed pole figures by discrete ODF methods: Comparison of ADC and WIMV for quartz and calcite with trigonal crystal and triclinic specimen symmetry - Textures and Microstructures 22 (1994), p233-260.
• U.F.Kocks, C.N.Tome, H.R.Wenk, "Texture and Anisotropy", Cambridge University Press. (2000);

  Others, Selected References on LaboTex and ADC Method:

• "... The strong and weak points of each method are examined showing that the iterative discrete methods (ADC and WIMV) are better suited for the reproduction of the texture function in the present case. In comparing these two discrete methods, it is evidenced that the ADC method reproduces more accurately both the experimental and synthetic texture functions over the entire range of texture sharpness considered ..." F.Caleyo, T.Baudin, M.H.Mathon and R.Penelle - Comparison of several methods for the reproduction of the orientation distribution function from pole figures in medium to strong textured materials - Eur. Phys. J. AP 15 (2001), p85-96 Abstract
• "... A discrete method (called as the Arbitrarily Defined Cells method) was applied to calculate the ODF. The 3-D distribution of orientations of the cellulose crystalline areas was reconstructed in the space of the Euler angles. Additionally, the complete pole figures as well as the inverse ones were recalculated. The presented analysis of the cellulose texture provides more extensive information on the space organisation of microfibrils than the standard methods...", Olek W., Pawlik K., Bonarski J. (2000): Space orientation of the crystalline areas of cellulose. Proceedings of the International Conference on Wood and Wood Fiber Composites, 13-15 April 2000, Stuttgart, Germany: 37-46.
• "... Direct Methods (WIMV, ADC) With 1 Degree Resolution Are Preferred...", K.J.Kozaczek,D.S.Kurtz, Quantitative texture analysis of blanket films and interconnects, Workshop on Texture in Electronic Applications NIST, Gaithersburg, MD, October 10-11, 2000. 2011-2012
• "... For a more detailed texture analysis, metallurgists often examine textures using the ODF in Euler space rather than pole figures. The ODFs in Bunge’s Euler space were constructed from the pole figures exported by MAUD using the LaboTex software (Pawlik & Ozga, 1999). Because six complete pole figures were used as input for calculating the ODF for each phase, the ambiguity introduced in this process is negligible. ...", Yusuke Onuki, Akinori Hoshikawa, Shigeo Sato, Pingguang Xu, Toru Ishigaki, Yoichi Saito, Hidekazu Todoroki and Makoto Hayashi, Rapid measurement scheme for texture in cubic metallic materials using time-of-flight neutron diffraction at iMATERIA, (ODF,tof,iMATERIA) Journal of Applied Crystallography, 49 (2016) 1579-1584, doi:View 10.1107/S160057671601164
• Fang Han, Xuan Luo, Knut Marthinsen, Guilin Wu, Ziyong Hou, Xiaoxu Huang, Effect of initial grain size on the recrystallization behavior and recrystallization texture of a Mg–3Gd alloy, Journal of Materials Science & Technology, Volume 188, 2024, Pages 169-182, ISSN 1005-0302, https://doi.org/10.1016/j.jmst.2023.11.044.
• Shih-Chieh Hsiao, Chih-I Chang, Tien-Yu Tseng, and Jui-Chao Kuo, Cellular Automaton-Based Modeling of Recrystallization Texture Considering Instability Criterion and Nonuniform Boundary Mobility in AA1100 Aluminum Alloy, Adv. Eng. Mater. 2023, 25, 2201687, https://doi.org/10.1002/adem.202201687
• Itzhak I. Maor, Katharina Kruppa, Adi Rozencweig, Amir Sterzer, Frank Steinbach, Vadim Beilin, Bernd Breidenstein, Gennady E. Shter, Meirav Mann-Lahav, Armin Feldhoff, and Gideon S. Grader, Superior Thermoelectric Performance of Textured, Ca3Co4−xO9+𝜹 Ceramic Nanoribbons, Adv. Funct. Mater. 2023, 33, 2304464, DOI: 10.1002/adfm.202304464
• Yogesh Singh, Sailesh Bhuyan, Kumud Kant Mehta, Effect of strain rate on the compressive strength and texture of maraging steel grade 250, Materials Today: Proceedings, Volume 91, Part 1, 2023, Pages 125-130, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2023.05.666.
• S. Jena, R. Dawn, W.-Y. Choi, Y. Singh, A. Ghosh, S.K. Sahoo, M.H. Jung, J. Gardner, V.K. Verma, K. Amemiya, V.R. Singh, Texture, electronic and magnetic states of Mn atoms in polycrystalline MnSi thin films facing a c-sapphire substrate studied by soft X-ray magnetic circular dichroism, Thin Solid Films, Volume 786, 2023, 140097, ISSN 0040-6090, https://doi.org/10.1016/j.tsf.2023.140097.
• G.GIRISH and G.GOPI, Improving the mechanical and corrosion properties of aerospace-grade AA7075 through microstructural modification using low-temperature friction stir processing, Bull. Mater. Sci. (2023) 46:217, https://doi.org/10.1007/s12034-023-03054-7
• MAREK FARYNA, KRZYSZTOF GŁOWINSKI, ROBERT CHULIST and ZBIGNIEW PEDZICH, Influence of Sintering Conditions on Anisotropy of Grain Boundary Networks and Microstructure Topology in Yttria-Stabilized Zirconia, METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 54A, NOVEMBER 2023 (4372), https://doi.org/10.1007/s11661-023-07171-0
• Tarun Maredla, Balaji Chaganty, S. Solomon Bobby, Santosh Kumar Sahoo, and C. Vanitha, Effect of Cold Rolling on the Microstructure and Texture of Selective Laser Melting Built Fe-Ni-Cr Steel, JMEPEG 2023, https://doi.org/10.1007/s11665-023-08364-9
• E.P.Ryklina, K.A.Polyakova, S.R.Murygin, M.G.Isaenkova, M.M.Zaripova, V.A.Fesenko, V.S.Komarov, N.V.Andreev, N.N.Resnina, V.A.Andreev, On Textural Heredity of Ni-rich Ti–Ni alloy: Specific Features of Transformation and Tensile Behavior, Shap. Mem. Superelasticity (2023) 9:384–401, https://doi.org/10.1007/s40830-023-00435-z
• Kengo Yoshida, Tomohisa Honke, Yasuhito Yamazak, Kunio Hayakawa, Hidetaka Nakanish, Adjustment of crystal orientations and application to crystal plasticity simulation of cup drawing, International Journal of Material Forming (2022) 15: 68, https://doi.org/10.1007/s12289-022-01713-4
• Valérie Potin, Houssem Boukhalfa, Nicolas Martin, Oblique angle co-deposition of nanocolumnar tungsten thin films with two W sources: Effect of pressure and target current, Materials Chemistry and Physics, Volume 281, 2022, 125864, ISSN 0254-0584, https://doi.org/10.1016/j.matchemphys.2022.125864.
• ANINDO ROY, SAURABH KUMAR GUPTA SATYAM SUWAS and KAUSHIK CHATTERJEE, The Significance of Crystallographic Texture in Dry Etching of Titanium to Engineer Bioinspired Nanostructured Bactericidal Surfaces, JOM, Vol. 74, No. 9, 2022, https://doi.org/10.1007/s11837-022-05395-w
• H. Waqas, Sumaira Naz, Muhammad bin Ahmed,Tayyab Ali Khan, Attaullah Shah, Degradation study of polydimethylsiloxane gaskets exposed in research reactor environment using diferent analytical techniques, Chemical Papers (2022) 76:7217–7227, https://doi.org/10.1007/s11696-022-02406-7
• Jerzy Dryzek, Mirosław Wróbel, Tomasz Czeppe, Recovery and recrystallization in vanadium foil studied by positron annihilation and X-ray methods, International Journal of Refractory Metals and Hard Materials, Volume 103, 2022, 105759, ISSN 0263-4368, https://doi.org/10.1016/j.ijrmhm.2021.105759.
• Zhengrong Fu, Xingfu Li, Cong Li, Hongjiang Pan, Yunhua Bai, Zhenghong Zhang, Yang Liu, Yifeng Liu, Jingran Yang, Yulan Gong, Chao Deng, Xinkun Zhu, Superior mechanical properties of pure Zr with heterogeneous structure, Materials Characterization, Volume 194, 2022, 112437, ISSN 1044-5803, https://doi.org/10.1016/j.matchar.2022.112437.
• Xianglong Wang, Li Luo, Wenzhu Li, Origin of fine equiaxed grains in industrial low-temperature grain-oriented silicon steel normalized sheet and their influence on magnetic properties, Journal of Magnetism and Magnetic Materials, Volume 552, 2022, 169210, ISSN 0304-8853, https://doi.org/10.1016/j.jmmm.2022.169210.
• Andrij Milenin, Mirosław Wróbel, Piotr Kustra, Investigation of the workability and surface roughness of thin brass wires in various dieless drawing technologies, Archives of Civil and Mechanical Engineering (2022) 22:10, https://doi.org/10.1007/s43452-021-00331-2
• Li Hu, Mingao Li, Qiang Chen, Tao Zhou, Laixin Shi, Mingbo Yang, Dependence of Microstructure Evolution and Mechanical Properties on Loading Direction for AZ31 Magnesium Alloy Sheet with Non‑basal Texture During In‑Plane Uniaxial Tension, Acta Metallurgica Sinica (English Letters) (2022) 35:223–234, https://doi.org/10.1007/s40195-021-01246-w
• F. Onimus, L. Gélébart, R. Brenner, Polycrystalline simulations of in-reactor deformation of recrystallized Zircaloy-4 tubes: Fast Fourier Transform computations and mean-field self-consistent model, International Journal of Plasticity, Volume 153, 2022, 103272, ISSN 0749-6419, https://doi.org/10.1016/j.ijplas.2022.103272.
• L.I.Zaynullina and I.V.Alexandrov, Evolution of Crystallographic Texture, Microstructure and Mechanical Properties during Flat Rolling of Alloys of the Cu–Zn System with Different Grain Sizes, Bulletin of the Russian Academy of Sciences: Physics, 2022, Vol. 86, No. 11, pp. 1301–1308. © Allerton Press, Inc., 2022, https://doi.org/10.3103/S1062873822110351
• D. Panda, S. Tripathy, R.K. Sabat, S. Suwas, and S.K. Sahoo, An Investigation on the Correlation Between Microstructure, Texture, and Mechanical Properties of Mg and its Alloys, JMEPEG (2022) 31:9183–9199, https://doi.org/10.1007/s11665-022-06934-x
• R.N.Vasin, Quantitative Texture Analysis: Implementation on the SKAT Neutron Diffractometer and Application in Materials and Earth Sciences, Crystallography Reports, 2022, Vol. 67, No. 1, pp. 64–80. © Pleiades Publishing, Inc., 2022, https://doi.org/10.1134/S1063774522010102
• Dinesh Srivastava, Study of Texture Evolution in Two‑Phase Zr‑2.5wt%Nb Pressure Tube, Material Fabricated Through Double‑Pass Pilgering Route, Transactions of the Indian National Academy of Engineering (2021) 6:533–546, https://doi.org/10.1007/s41403-021-00226-x
• Andrij Milenin, Mirosław Wróbel, Piotr Kustra, Marek Packo, Dorota Byrska‑Wójcik, Joanna Sulej‑Chojnacka, Bartłomiej Płonka, Mechanical properties, crystallographic texture, and in vitro bio‑corrosion of low‑alloyed Zn–Mg, produced by hot and cold drawing for biodegradable surgical wires, Archives of Civil and Mechanical Engineering (2021) 21:163, https://doi.org/10.1007/s43452-021-00311-6
• Lailesh Kumar, Santosh Kumar Sahoo, Syed Nasimul Alam, Effect of xGnP/MWCNT reinforcement on mechanical, wear behavior and crystallographic texture of copper-based metal matrix composite, Materials Science and Engineering: B, Volume 263, 2021, 114888, ISSN 0921-5107, https://doi.org/10.1016/j.mseb.2020.114888.
• M.G.Isaenkova, O.A.Krymskaya, Ya.A.Babich and P.N.Medvedev, Effect of the Crystallographic Texture in the α Phase on the Anisotropy of the Properties of Pseudo-α and (α + β) Titanium Alloy Sheets, Russian Metallurgy (Metally), Vol. 2021, No. 4, pp. 430–436, https://doi.org/10.1134/S0036029521040121
• Xusheng Yang, Weijiu Huang, Xianghui Zhu, Fei Guo, Yanlong Ma, Linjiang Chai, Ran Zhang, Infuence of delta′ Phase with GP‑I Zones Fillings on Slip Behavior and Cold Rolling Texture in AA2099, Metals and Materials International (2021) 27:3307–3315, https://doi.org/10.1007/s12540-020-00670-4
• Anna Wójcik, Robert Chulist, Paweł Czaja, Maciej Kowalczyk, Przemysław Zackiewicz, Norbert Schell, Wojciech Maziarz, Evolution of microstructure and crystallographic texture of Ni-Mn-Ga melt-spun ribbons exhibiting 1.15% magnetic field-induced strain, Acta Materialia, Volume 219, 2021, 117237, ISSN 1359-6454, https://doi.org/10.1016/j.actamat.2021.117237.
• V.D. Sitdikov, R.K. Islamgaliev, G.F. Sitdikova, A.V. Ganeev, and M.A. Nikitin, Unusual Rolling Texture in Ferritic/Martensitic Steel, JMEPEG (2022) 31:1971–1980, https://doi.org/10.1007/s11665-021-06357-0
• Xiaoyu Fan, Yu Li, Chun Xu, Binjun Wang, Ruizhi Peng, Jianbin Chen, Improved mechanical anisotropy and texture optimization of a 3xx aluminum alloy by differential temperature rolling, Materials Science and Engineering: A, Volume 799, 2021, 140278, ISSN 0921-5093, https://doi.org/10.1016/j.msea.2020.140278.
• G. Girish and V. Anandakrishnan, Fabrication of Al-Zn-Mg-Cu Matrix Composite by Multi-pass Recursive Friction Stir Processing and Its Characterization, JMEPEG (2021) 30:5868–5888, https://doi.org/10.1007/s11665-021-05844-8
• R. Sitek, R. Molak, J. Zdunek, P. Bazarnik, P. Wiśniewski, K. Kubiak, J. Mizera, Influence of an aluminizing process on the microstructure and tensile strength of the nickel superalloy IN 718 produced by the Selective Laser Melting, Vacuum, Volume 186, 2021, 110041, ISSN 0042-207X, https://doi.org/10.1016/j.vacuum.2020.110041.
• Xingming Zhao, Wenbin Liu, Tianlin Wang, AiHua Liu, Tianhao Li, Yijun Chen, XiaoXiao Liu, Xiaochen Ma, Benzhe Sun, Yang Qi, Growth of Bi2Sr2CaCu2O8+δ thin films with enhanced superconducting properties by incorporating NiO nanoparticles, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume 627, 2021, 127121, ISSN 0927-7757, https://doi.org/10.1016/j.colsurfa.2021.127121.
• Jerzy Dryzek, Mirosław Wróbel, Recovery and recrystallization in molybdenum studied by positron annihilation and X-ray methods, International Journal of Refractory Metals and Hard Materials, Volume 97, 2021, 105514, ISSN 0263-4368, https://doi.org/10.1016/j.ijrmhm.2021.105514.
• Qubo He, Fusheng Pan, Dongzhe Wang, Haiding Liu, Fei Guo, Zhongwei Wang, Yanlong Ma, Microstructure and properties of 316L stainless steel foils for pressure sensor of pressurized water reactor, Nuclear Engineering and Technology, Volume 53, Issue 1, 2021, Pages 172-177, ISSN 1738-5733, https://doi.org/10.1016/j.net.2020.06.006.
• A. Blanco, J.M. Hallen, Tang Son Nguyen, Tu Le Manh, Influence of crystallographic texture on susceptibility to stress corrosion cracking mechanism of API 5L X52 steel for sour service, Engineering Failure Analysis, Volume 119, 2021, 105002, ISSN 1350-6307, https://doi.org/10.1016/j.engfailanal.2020.105002.
• A. Pisarev, I. Arkhipov, Ya. Babich, M. Berdnikova, Yu. Gasparyan, K. Gutorov, S. Grashin, V. Efimov, M. Isaenkova, S. Krat, O. Krymskaya, V. Kurnaev, T. Stepanova, E. Vovchenko, I. Vizgalov, M. Zibrov, Post-mortem analyses of gap facing surfaces of tungsten tiles of T-10 ring limiter, Fusion Engineering and Design, Volume 162, 2021, 112105, ISSN 0920-3796, https://doi.org/10.1016/j.fusengdes.2020.112105.
• Riad Badji, Bellel Cheniti, Charlie Kahloun, Thierry Chauveau, Mohammed Hadji, Brigitte Bacroix, Microstructure, mechanical behavior, and crystallographic texture in a hot forged dual-phase stainless steel, The International Journal of Advanced Manufacturing Technology (2021) 116:1115–1132, https://doi.org/10.1007/s00170-021-07502-8
• Saliha Gachi, Mouloud Aissani, Thierry Baudin, Anne.Laure Helbert, François Brisset, Sébastien Gautrot, Marie-Hélène Mathon, Djamel Bradai and Fouad Boubenider, The Microstructure, Texture and Mechanical Properties of Friction Stir Welded Aluminum Alloy, Russian Journal of Non-Ferrous Metals, 2020, Vol. 61, No. 5, pp. 523–533. © Allerton Press, Inc., 2020. https://doi.org/10.3103/S1067821220050041
• Satyaveer Singh Dhinwal, Aman Jyoti Shukla, Somjeet Biswas, Devesh Kumar Chouhan, Evolution of microstructure and crystallographic texture in α-β Brass during equal channel angular pressing, Materials Characterization, Volume 163, 2020, 110270, ISSN 1044-5803, https://doi.org/10.1016/j.matchar.2020.110270.
• Sk. Jabed Miadad, T. Venugopalan, Nimai Halder, and B. Ravi Kumar, On the Study of Batch Annealing Parameter Optimization for Higher Lankford Value in High Phosphorus Interstitial Free High Strength Steel, JMEPEG (2020) 29:7598–7606, https://doi.org/10.1007/s11665-020-05199-6
• Lihong Yuan, Mengyao Yang, Yun Li, Wenrui Wang, Hui Zhang, and Wangfeng Zhang, Nondestructive Texture Measurement of As-Received Ti Alloy Tubing via Simultaneous Shaping and Tilting Defocusing Correction, JMEPEG (2020) 29:5080–5087, https://doi.org/10.1007/s11665-020-05056-6
• Joanna Kowalska and Marcin Kowalski, Development of Microstructure and Texture After Cold-Rolling Fe-24Mn-3Al-3Si High-Manganese Steel, JMEPEG (2020) 29:1495–1501, https://doi.org/10.1007/s11665-019-04516-y
• Brahim Nabi, Anne-Laure Helbert, François Brisset, Thierry Waeckerlé, Rémy Batonnet, Thierry Baudin, Effect of the hot rolling on Goss development and magnetic induction in an advanced soft magnetic Fe–27%Co alloy, Journal of Alloys and Compounds, Volume 834, 2020, 155149, ISSN 0925-8388, https://doi.org/10.1016/j.jallcom.2020.155149.
• Biraj Kumar Sahoo, Anjana Deva, Pratiksha Pandey, Lalit Kumar Meena, Sandip Ghosh Chowdhury, and Bimal Kumar Jha, Microstructure–Property Correlation in High-Strength Formable Steel with Varying Nb-Si Content, JMEPEG (2020) 29:1901–1908, https://doi.org/10.1007/s11665-020-04675-3
• G.D. Sathiaraj, R. Kalsar, S.S.S. Kumar, S. Suwas, W. Skrotzki, Evolution of texture during cold-rolling of a CrCoNi medium-entropy alloy, Materials Today: Proceedings, Volume 27, Part 3, 2020, Pages 2147-2151, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2019.09.084.
• Niloofar Eftekhari, Waqas Muhammad, Farahnaz Haftlang, Abbas Zarei-Hanzaki, Étienne Martin, Microstructural evolution and corrosion behavior of Sanicro 28 during thermomechanical processing, Materials Today Communications, Volume 24, 2020, 101228, ISSN 2352-4928, https://doi.org/10.1016/j.mtcomm.2020.101228.
• José Alberto Pérez Benitez, Tu Le Manh, 7 - Model for the correlation between Barkhausen noise and, microstructure, and physical properties, Editor(s): Tu Le Manh, José Alberto Pérez Benitez, José Hiram Espina Hernández, José Manuel Hallen López, In Woodhead Publishing Series in Electronic and Optical Materials, Barkhausen Noise for Nondestructive Testing and Materials Characterization in Low-Carbon Steels, Woodhead Publishing, 2020, Pages 183-222, ISBN 9780081028001,
• Tu Le Manh, José Alberto Pérez Benitez, José Hiram Espina Hernández, José Manuel Hallen López, 4 - Materials, Editor(s): Tu Le Manh, José Alberto Pérez Benitez, José Hiram Espina Hernández, José Manuel Hallen López, In Woodhead Publishing Series in Electronic and Optical Materials, Barkhausen Noise for Nondestructive Testing and Materials Characterization in Low-Carbon Steels, Woodhead Publishing, 2020, Pages 95-114, ISBN 9780081028001, https://doi.org/10.1016/B978-0-08-102800-1.00004-6.
• ADRIAN OPONOWICZ, MARIANNA MARCISZKO-WIĄCKOWSKA, ANDRZEJ BACZMANSKI, MANUELA KLAUS, CHRISTOPH GENZEL, SEBASTIAN WRONSKI, KAMILA KOLLBEK, and MIROSŁAW WROBEL, Gradient of Residual Stress and Lattice Parameter in Mechanically Polished Tungsten Measured Using Classical X-rays and Synchrotron Radiation, METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 37A, JUNE 2020—5945, https://doi.org/10.1007/s11661-020-05967-y
• I. MEJI, A-CABALLERO, C. ESCOBAR-MARTINEZ, M.PALOMAR-PARDAVE, TU LE MANH, M. ROMERO-ROMO, E. RODRIGUEZ-CLEMENTE, L.LARTUNDO-ROJAS, and I. CAMPOS-SILVA, On the Corrosion Mechanism of Borided X12CrNiMoV12-3 Steel Immersed in a Neutral Aqueous Solution Containing Chloride and Sulfate Ions, METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 51A, SEPTEMBER 2020, https://doi.org/10.1007/s11661-020-05869-z
• SRIJAN ACHARYA, SUMEET MISHRA, K.U. YAZAR, KAUSHIK CHATTERJEE and SATYAM SUWAS, Evolution of Deformation Texture in Low Modulus b-Ti-34Nb-2Ta-(0, 3)Zr-0.5O Alloys, METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 51A, AUGUST 2020, 4045, https://doi.org/10.1007/s11661-020-05850-w
• TATIANA MISHUROVA, KATIA ARTZT, JAN HAUBRICH, SERGEI EVSEVLEEV, ALEXANDER EVANS, MATTHIAS MEIXNER, ITZIAR SERRANO MUNOZ, IGOR SEVOSTIANOV, GUILLERMO REQUENA, and GIOVANNI BRUNO, Connecting Diffraction-Based Strain with Macroscopic Stresses in Laser Powder Bed Fused Ti-6Al-4V, METALLURGICAL AND MATERIALS TRANSACTIONS A,VOLUME 51A, JUNE 2020, https://doi.org/10.1007/s11661-020-05711-6
• JIEHUA LI, JUN LI, OLIVER RENK, REINHARD PIPPAN, and PRADIPTA GHOSH, Effect of Heterophase Interfaces on Microstructure and Crystallographic Texture Evolution During Rolling of Directionally Solidified Ag-Cu Eutectic Alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 51A, JANUARY 2020, https://doi.org/10.1007/s11661-019-05515-3
• Gu, B., Chekhonin, P., Schaarschuch, R., Oertel, C., Xin, S. W., & Ma, C. L. (2020). Microstructure, texture and hardness of a metastable b-titanium alloy after bar-rolling and annealing, 825, 1–12. doi:View 10.1016/j.jallcom.2020.154082
• Hattal, A., Chauveau, T., Djemai, M., Jacques, J., Bacroix, B., & Dirras, G. (2020). Data in brief Data related to spectrum analyzes for phases identification, microstructure and mechanical properties of additive manufactured Ti6Al4V reinforced with nano-Yttria stabilized zirconia. Data in Brief, 29, 105249. doi:View 10.1016/j.dib.2020.105249
• Ma, D., Yang, P., Gu, X., Onuki, Y., & Sato, S. (2020). Materials Characterization In-situ neutron di ff raction investigation on the martensite transformation , texture evolution and martensite reversion in high manganese TRIP steel. Materials Characterization, 163(March), 110244. doi:View 10.1016/j.matchar.2020.110244
• Mishra, S., Yazar, K. U., More, A., Kumar, L., Lingam, R., Reddy, N. V, Suwas, S. (2020). Elucidating the deformation modes in incremental sheet forming process: Insights from crystallographic texture, microstructure and mechanical properties. Materials Science & Engineering A, 139311. doi:View 10.1016/j.msea.2020.139311
• Mishurova, T., Artzt, K., Haubrich, J. A. N., Evsevleev, S., Evans, A., Meixner, M., Bruno, G. (2020). Connecting Diffraction-Based Strain with Macroscopic Stresses in Laser Powder Bed Fused Ti-6Al-4V. Metallurgical and Materials Transactions A. . doi:View 10.1007/s11661-020-05711-6
• Shrivastava, P., Nasimul, S., Panda, D., & Kumar, S. (2020). Diamond & Related Materials Effect of addition of multiwalled carbon nanotube / graphite nanoplatelets hybrid on the mechanical properties of aluminium. Diamond & Related Materials, 104 (November 2019), 107715. doi:View 10.1016/j.diamond.2020.107715
• Singh, S., Jyoti, A., Biswas, S., & Kumar, D. (2020). Materials Characterization Evolution of microstructure and crystallographic texture in α - β Brass during equal channel angular pressing. Materials Characterization, 163 (March), 110270. doi:View 10.1016/j.matchar.2020.110270
• Srinivasan, N., Velmurugan, R., Singh, S. K., Pant, B., & Kumar, R. (2020). Texture strengthening and anisotropic hardening of mill annealed Ti-6Al-4V alloy under equi-biaxial tension. Materials Characterization, 110349. doi:View 10.1016/j.matchar.2020.110349
• Tang, W., Zhou, G., Shao, Y., Li, D., Peng, Y., & Wang, H. (2020). Materials Characterization On the role of yttrium in microstructure evolution and texture modification during magnesium alloy extrusion. Materials Characterization, 162 (November 2019), 110189. doi:View 10.1016/j.matchar.2020.110189
• Vinjamuri, R., Bishoyi, B. D., Sabat, R. K., Kumar, M., & Sahoo, S. K. (2020). Materials Science & Engineering A Microstructure , texture , mean free path of dislocations and mechanical properties of Ti – 6Al – 4V alloy during uniaxial compression at elevated temperatures. Materials Science & Engineering A, 776(February), 139042. doi:View 10.1016/j.msea.2020.139042
• Yoshida, K., & Okada, N. (2020). Plastic flow behavior of fcc polycrystal subjected to nonlinear loadings over large strain range. International Journal of Plasticity, 127(December 2019), 102639. doi:View 10.1016/j.ijplas.2019.12.002
• K.S. THOOL, K.V. MANI KRISHNA, D. SRIVASTAVA, A. PATRA, R.D. DOHERTY and I. SAMAJDAR, Confirmation of Dynamically Recrystallized Grains in Hexagonal Zirconium through Local Internal Friction Measurements, METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 50A, NOVEMBER 2019, https://doi.org/10.1007/s11661-019-05412-9
• Acharya, S., Panicker, A. G., Laxmi, D. V., Suwas, S., & Chatterjee, K. (2019). Study of the in fl uence of Zr on the mechanical properties and functional response of Ti-Nb-Ta-Zr-O alloy for orthopedic applications. Materials & Design, 164, 107555. doi:View 10.1016/j.matdes.2018.107555
• Baudin, T., Nabi, B., Helbert, A., Azzeddine, H., Bradai, D., Waeckerle, T., Paris, C. (2019). Origin of the { 111}112 Cold Rolling Texture Development in a Soft Magnetic Fe-27 % Co Alloy, 28(June), 3767–3776. doi:View 10.1002/mawe.201800110
• Gu,T., Medy, J., Klosek, V., Castelnau, O., Forest, S., & Hervé-luanco, E. (2019). Multiscale modeling of the elasto-plastic behavior of architectured and nanostructured Cu-Nb composite wires and comparison with neutron diffraction experiments, 122(April), 1–30. doi:View 10.1016/j.ijplas.2019.04.011
• Komarov, V., Khmelevskaya, I., Karelin, R., Prokoshkin, S., & Zaripova, M. (2019a). Effect of biaxial cyclic severe deformation on structure and properties of Ti-Ni alloys. Journal of Alloys and Compounds, 797, 842–848. doi:View 10.1016/j.jallcom.2019.05.127
• Krawczynska, A. T., Gierlotka, S., Suchecki, P., Setman, D., Adamczyk-Cieślak, B.,Gloc, M., Zehetbauer, M. (2019). Phenomena Occurring in Nanostructured Stainless Steel 316LVM during Annealing under High Hydrostatic Pressure, 1800101, 1–9. doi:View 10.1002/adem.201800101
• Kumar, K., Masanta, M., & Kumar, S. (2019). Microstructure evolution and metallurgical characteristic of bead-on-plate TIG welding of Ti-6Al-4V alloy. Journal of Materials Processing Tech., 265 (October 2018), 34–43. doi:View 10.1016/j.jmatprotec.2018.10.002
• Luna, M. C., Le, T., Sierra, R. C., Flores, J. V. M., Rojas, L. L., & Estrada, E.M.A. (2019). Study of corrosion behavior of API 5L X52 steel in sulfuric acid in the presence of ionic liquid 1-ethyl 3-methylimidazolium thiocyanate as corrosion inhibitor. Journal of Molecular Liquids, 289, 111106. doi:View 10.1016/j.molliq.2019.111106
• Talekar, V. R., Patra, A., Sahoo, S. K., Karak, S. K., & Mishra, B. (2019). International Journal of Refractory Metals mechanically alloyed and liquid phase sintered W-Ni for structural application. International Journal of Refractory Metals & Hard Materials, 82(April), 183–198. doi:View 10.1016/j.ijrmhm.2019.03.027
• Sabban, R., Bahl, S., Chatterjee, K., & Suwas, S. (2019). Acta Materialia Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness. Acta Materialia, 162, 239–254. doi:View 10.1016/j.actamat.2018.09.064
• Sathiaraj, G. D., Kalsar, R., Kumar, S. S. S., Suwas, S., & Skrotzki, W. (2019). Materials Today : Proceedings Evolution of texture during cold-rolling of a CrCoNi medium-entropy alloy. Materials Today: Proceedings, doi:View 10.1016/j.matpr.2019.09.084
• Sitdikov, V.D., Islamgaliev, R. K., Nikitina, M. A., & Sitdikova, G. F. (2019). Application of X-ray Technique to Study the Structure of Ultrafine-Grained Ferritic / Martensitic Steel. Journal of Materials Engineering and Performance, 28 (11), 7109–7118. doi:View 10.1007/s11665-019-04440-1
• Sitdikov, V. D., Zaynullina, L. I., Wei, K. X., Wei, W., & Alexandrov, I. V. (2019). Materials Characterization Unusual texture transition during the rolling of the UFG Cu-10 % Zn alloy. Materials Characterization, 149 (August 2018), 153–157. doi:View 10.1016/j.matchar.2019.01.027
• Suresh, M., Sharma, A., More, A. M., Kalsar, R., Bisht, A., Nayan, N., & Suwas, S. (2019). Effect of equal channel angular pressing ( ECAP ) on the evolution of texture, microstructure and mechanical properties in the Al-Cu-Li alloy AA2195. Journal of Alloys and Compounds, 785, 972–983. doi:View 10.1016/j.jallcom.2019.01.161
• Tekumalla, S. (2019). Superior ductility in magnesium alloy-based nanocomposites : the crucial role of texture induced by nanoparticles. Journal of Materials Science, 54(11), 8711–8718. doi:View 10.1007/s10853-019-03460-5
• Zdunek, J., Adamczyk, B., Koralnik, M., & Kulczyk, M. (2019). The influence of combined hydrostatic extrusion and rolling on the microstructure, texture and mechanical properties of Al-Li alloys. Journal of Manufacturing Processes, 47(April 2018), 254–262. doi:View 10.1016/j.jmapro.2019.09.042
• Acharya, S., Bahl, S., Chatterjee, K., & Suwas, S. (2018). Materialia Variant selection in metastable 𝛽 Ti-V-Fe-Al alloy during triaxial and uniaxial compression, 4 (August), 20–32. doi:View 10.1016/j.mtla.2018.08.026
• Bacroix, B., Queyreau, S., Chaubet, D., Siv, E., & Chauveau, T. (2018). Acta Materialia The influence of the cube component on the mechanical behaviour of copper polycrystalline samples in tension. Acta Materialia, 160, 121–136. doi:View 10.1016/j.actamat.2018.08.044
• Chattopadhyay, S., Anand, G., Ghosh, S., & Manna, I. (2018). Materials Science & Engineering A Effect of reverse austenitic transformation on mechanical property and associated texture evolution in AISI 316 austenitic stainless steel processed by low temperature rolling and annealing. Materials Science & Engineering A, 734(July), 139–148. doi:View 10.1016/j.msea.2018.07.087
• Dryzek, J. (2018). Observation of the Recrystallization Process in Pure Nb and Zr Using Positron Lifetime Spectroscopy and XRD Techniques, 1800051, 1–7. doi:View 10.1002/pssb.201800051
• Ghosh, P., Kormout, K. S., Lienert, U., Keckes, J., & Pippan, R. (2018). Acta Materialia Deformation characteristics of ultra fi ne grained and nanocrystalline iron and pearlitic steel - An in situ synchrotron investigation. Acta Materialia, 160, 22–33. doi:View 10.1016/j.actamat.2018.08.036
• Javaheri,V., Khodaie, N., Kaijalainen, A., & Porter, D. (2018). Materials Characterization Effect of niobium and phase transformation temperature on the microstructure and texture of a novel 0.40 % C thermomechanically processed steel. Materials Characterization, 142(May), 295–308. doi:View 10.1016/j.matchar.2018.05.056
• Kumar, L., Alam, S. N., Sahoo, S. K., & Teja, M. B. K. (2018). ScienceDirect Mechanical Properties of Cu-MWCNT Composites Developed by Powder Metallurgy Route. Materials Today: Proceedings, 5(9), 19883–19892. doi:View 10.1016/j.matpr.2018.06.353
• Nabi, B., Helbert, A., & Baudin, T. (2020). Effect of the hot rolling on Goss development and magnetic induction in an advanced soft magnetic Fe 27 % Co alloy, 834, 1–6. doi:View 10.1016/j.jallcom.2020.155149
• Panda, A. K., Singh, A., Divakar, R., Krishna, N. G., Reddy, V. R., Thirumurugesan, R., Mohandas, E. (2018). Crystallographic texture study of pulsed laser deposited Cr2O3 thin films, 660(February 2017), 328–334. doi:View 10.1016/j.tsf.2018.06.030
• Perlovich, Y. A., Isaenkova, M. G., Dobrokhotov, P. L., Rubanov, A. E., & Stolbov, S. D. (2018). Effect of Layer-by-Layer Texture Inhomogeneity on the Mechanical Properties of Hot-Rolled Steel Sheets, 2018 (11), 1027–1034. doi:View 10.1134/S0036029518110095
• Rao, A. S., Manda, P., Mohan, M. K., & Singh, A. K. (2018). Microstructure and mechanical properties of vacuum induction melted as cast 43Ni-29Fe-18W-10Co matrix alloy. Vacuum, 155(April), 169–177. doi:View 10.1016/j.vacuum.2018.05.046
• Sathiaraj, G. D., Skrotzki, W., Pukenas, A., Schaarschuch, R., Immanuel, R. J., Panigrahi, S. K.Kumar, (2018). Intermetallics Effect of annealing on the microstructure and texture of cold rolled CrCoNi medium-entropy alloy. Intermetallics, 101(August), 87–98. doi:View 10.1016/j.intermet.2018.07.014
• Shinohara, Y., Matsumoto, Y., Tahara, M., & Hosoda, H. (2018). Materialia Development of ⟨001⟩ -fiber texture in cold-groove-rolled Ti-Mo-Al-Zr biomedical alloy. Materialia, 1 (May), 52–61. doi:View 10.1016/j.mtla.2018.07.008
• Bahl, S., Nithilaksh, P. L., Suwas, S., Kailas, S. V, & Chatterjee, K. (2017). Processing – Microstructure – Crystallographic Texture – Surface Property Relationships in Friction Stir Processing of Titanium. Journal of Materials Engineering and Performance, 26(9), 4206–4216. doi:View 10.1007/s11665-017-2865-6
• Bishoyi, B. D., Sabat, R. K., & Sahoo, S. K. (2018). Materials Science & Engineering A E ff ect of temperature on microstructure and texture evolutions during uniaxial compression of commercially pure titanium. Materials Science & Engineering A, 718(October 2017), 398–411. doi:View 10.1016/j.msea.2018.01.128
• Bishoyi, B. D., Sabat, R. K., Sahu, J., & Sahoo, S. K. (2017). Materials Science & Engineering A E ff ect of temperature on microstructure and texture evolution during uniaxial tension of commercially pure titanium. Materials Science & Engineering A, 703(July), 399–412. doi:View 10.1016/j.msea.2017.07.081
• Bisht, A., Jagadeesh, G., & Suwas, S. (2017). Investigation on Shock Wave-Assisted Deformation of Nano Nickel. doi:View 10.1007/978-3-319-44866-4
• Chatterjee, S., Ghosh, A., & Mallick, A. B. (2018). ScienceDirect Understanding the evolution of microstructural features in the in- situ intermetallic phase reinforced Al / Al 3 Ti nanocomposite. Materials Today: Proceedings, 5(3), 10118–10130. doi:View 10.1016/j.matpr.2017.11.008
• Choi, J. W., & Shin, K. S. (2017). Effects of Zn Content and Initial Grain Size on Double Peak Basal Textures of Mg-Zn-Al Alloys, 23(4), 745–755. doi:View 10.1007/s12540-017-6841-3
• Dryzek, E., Dryzek, J., & Metallic, I. (2016). Recrystallization in severely, 2042(10), 2031–2042. doi:View 10.1002/pssb.201600280
• Dufrenoy, S., Chauveau, T., Brenner, R., & Bacroix, B. (2018). Comparison of 2 methodologies developed for the determination of residual stresses through X-ray diffraction : application to a textured hcp titanium alloy, 341–355. doi:View 10.1007/s12289-017-1354-7
• Gebrekrstos, A., Sharma, M., Bahl, S., Madras, G., & Suwas, S. (2018). Process mediated polymorphism , crystallographic texture and structure-property correlation in crystalline / amorphous blends. Polymer, 138, 307–319. doi:View 10.1016/j.polymer.2018.01.075
• Ghosh, P., Petegem, S. Van, Swygenhoven, H. Van, & Chokshi, A. H. (2017). Materials Science & Engineering A An in-situ synchrotron study on microplastic fl ow of electrodeposited nanocrystalline nickel. Materials Science & Engineering A, 701(February), 101–110. doi:View 10.1016/j.msea.2017.06.075
• Gu, T., Castelnau, O., Forest, S., Hervé-luanco, E., Lecouturier, F., & Proudhon, H. (2017). International Journal of Solids and Structures Multiscale modeling of the elastic behavior of architectured and nanostructured Cu – Nb composite wires, 121, 148–162. doi:View 10.1016/j.ijsolstr.2017.05.022
• Gurao, N. P., & Suwas, S. (2017). Effect of Phase Contiguity and Morphology on the Evolution of Deformation Texture in Two-Phase Alloys. Metallurgical and Materials Transactions A, 48(2), 809–827. doi:View 10.1007/s11661-016-3856-1
• Karjalainen, L. P., & Society, M. (n.d.). Correlation of Microstructure and Texture in a Two-Phase High-Mn Twinning-Induced Plasticity Steel During Cold Rolling. doi:View 10.1007/s11661-017-4241-4
• Kumar, G., Lodh, A., Singh, J., Singh, R., Srivastava, D., Dey, G. K., & Samajdar, I. (2017). CIRP Journal of Manufacturing Science and Technology Experimental characterization and fi nite element modeling of through thickness deformation gradient in a cold rolled zirconium sheet. CIRP Journal of Manufacturing Science and Technology, 19, 176–190. doi:View 10.1016/j.cirpj.2017.09.002
• Le, T., Caleyo, F., Hallen, J. M., Benítez, J. A. P., & Hernández, J. H. E. (2017). Materials Science & Engineering B Novel method for the accurate determination of magnetocrystalline energy from Barkhausen noise in ferromagnetic materials. Materials Science & Engineering B, 225(August), 98–107. doi:View 10.1016/j.mseb.2017.08.015
• Le, T., Caleyo, F., Hallen, J. M., Espina-hernández, J. H., & Pérez-benitez, J. A. (2018). Journal of Magnetism and Magnetic Materials Model for the correlation between magnetocrystalline energy and Barkhausen noise in ferromagnetic materials. Journal of Magnetism and Magnetic Materials, 454, 155–164. doi:View 10.1016/j.jmmm.2018.01.066
• Leibenguth, P., Slawik, S., Coelho, R. S., Horwat, D., Migot, S., Lechthaler, B., & Mücklich, F. (2018). Estimation of residual stresses in perovskite fi lms for capacitor applications. Thin Solid Films, 648(October 2017), 21–25. doi:View 10.1016/j.tsf.2018.01.011
• Loganathan, A., Sharma, A., Rudolf, C., Zhang, C., & Nautiyal, P. (2017). Materials Science & Engineering A In-situ deformation mechanism and orientation e ff ects in sintered 2D boron nitride nanosheets. Materials Science & Engineering A, 708(October), 440–450. doi:View 10.1016/j.msea.2017.10.019
• Manh, T. Le, Hallen, J. M., & Caleyo, F. (2018). Materials Characterization Electron backscatter di ff raction helps direct calculation of magnetocrystalline anisotropy energy in API 5L steels. Materials Characterization, 141(April), 86–96. doi:View 10.1016/j.matchar.2018.04.033
• Ozaltin, K., Panigrahi, A., Chrominski, W., Bulutsuz, A. G., & Kulczyk, M. (2017). Microstructure and Texture Evolutions of Biomedical Ti-13Nb-13Zr Alloy Processed by Hydrostatic Extrusion. Metallurgical and Materials Transactions A, 48(11), 5747–5755. doi:View 10.1007/s11661-017-4278-4
• Park, J. W., Park, S. J., & Shin, K. S. (2017). Effects of Tensile Twinning on the Stretch Formability of Mg, 23(3), 444–449. doi:View 10.1007/s12540-017-6399-0
• Park, S. M., Koo, Y. M., Shim, B. Y., & Lee, D. N. (2017). Effects of Process Variables in Decarburization Annealing of Fe-3 % Si-0 . 3 % C Steel Sheet on Textures and Magnetic Properties, 23(1), 220–232. doi:View 10.1007/s12540-017-6042-0
• Rao, A. S., Manda, P., Mohan, M. K., Nandy, T. K., & Singh, A. K. (2018). Microstructure , texture and mechanical properties of hot rolled and annealed Ni-Fe-W and Ni-Fe-W-Co matrix alloys. Journal of Alloys and Compounds, 742, 937–951. doi:View 10.1016/j.jallcom.2018.01.336
• Schmitt, J., & Solas, D. (2018). Measurement of Texture Gradient in Heavily Cold-Drawn Pearlitic Wires, 1700279, 1–8. doi:View 10.1002/adem.201700279
• Sharma, S., Kumar, B. R., Kashyap, B. P., & Prabhu, N. (2018). Materials Science & Engineering A E ff ects of concurrent strain induced martensite formation on tensile and texture properties of 304L stainless steel of varying grain size distribution. Materials Science & Engineering A, 725(October 2017), 215–227. doi:View 10.1016/j.msea.2018.03.099
• Suresh, M., Sharma, A., More, A. M., Nayan, N., & Suwas, S. (2018). Effect of Scandium addition on evolution of microstructure , texture and mechanical properties of thermo-mechanically processed Al-Li alloy AA2195. Journal of Alloys and Compounds, 740, 364–374. doi:View 10.1016/j.jallcom.2017.12.045
• Tekumalla, S., Bibhanshu, N., Shabadi, R., Suwas, S., Mai, T., & Ha, H. (2018). Materials Science & Engineering A Evolution of texture and asymmetry and its impact on the fatigue behaviour of an in-situ magnesium nanocomposite. Materials Science & Engineering A, 727(April), 61–69. doi:View 10.1016/j.msea.2018.04.101
• Tripathi, A., Murty, S. V. S. N., & Narayanan, P. R. (2017). Microstructure and texture evolution in AZ31 magnesium alloy during caliber rolling at different temperatures. Journal of Magnesium and Alloys, 5(3), 340–347. doi:View 10.1016/j.jma.2017.07.001
• Vakhitova, E., Sornin, D., Barcelo, F., & François, M. (2017). Texture evolution in Oxide Dispersion Strengthened ( ODS ) steel tubes during pilgering process. Journal of Nuclear Materials, 494, 20–28. doi:View 10.1016/j.jnucmat.2017.07.002
• Verstraete, B. K., Azzedine, H., Helbert, A., Boumediene, H., Alia, E., & Ezzouar, B. (2017). Accumulative Roll Bonding at Room Temperature of a Bi-Metallic AA5754 / AA6061 Composite : Impact of Strain Path on Microstructure , Texture , and Mechanical Properties **, 1–8. doi:View 10.1002/adem.201700285
• Wierzbanowski, K. (2017). Acta Materialia Texture effects due to asymmetric rolling of polycrystalline copper, 139, 30–38. doi:View 10.1016/j.actamat.2017.07.062
• Zuñiga, M. A. B., & Rosales, H. J. D. (2018). Effect of microstructure and crystallographic texture on the toughness anisotropy of API 5L X46 STEEL, (August 2017), 749–761. doi:View 10.1111/ffe.12782
• Chai, L., Chen, B., Wang, S., Zhang, Z., & Murty, K. L. (2016). Microstructural, textural and hardness evolution of commercially pure Zr surface-treated by high current pulsed electron beam. Applied Surface Science, 390, 430–434. doi:View 10.1016/j.apsusc.2016.08.128
• Chao, Q., Hodgson, P. D., & Beladi, H. (2017). Thermal stability of an ultra fi ne grained Ti-6Al-4V alloy during post- deformation annealing. Materials Science & Engineering A, 694(April), 13–23. doi:View 10.1016/j.msea.2017.03.082
• Chen, X. P., Sun, H. F., Chen, D., Wang, L. X., & Liu, Q. (2016). On recrystallization texture and magnetic property of Cu-Ni alloys. Materials Characterization, 121, 149–156. doi:View 10.1016/j.matchar.2016.10.006
• Cu-y, O., Maharana, H. S., Panda, S., & Basu, A. (2017). Effect of texture and microstructure on properties of electrodeposited. Surface & Coatings Technology, 315, 558–566. doi:View 10.1016/j.surfcoat.2017.02.035
• Dittrich, M., Meixner, M., & Schumacher, G. (2016). Texture formation in amorphous Al86Ni6Y4.5La1.5Co2 splats by thermal and mechanical treatment. Intermetallics, 74, 46–52. doi:View 10.1016/j.intermet.2016.04.008
• Góral, A. (2017). Nanoscale structural defects in electrodeposited Ni/Al2O3 composite coatings. Surface & Coatings Technology. 319, 23–32. doi:View 10.1016/j.surfcoat.2017.03.061
• Guo, F., Zhang, D., Wu, H., Jiang, L., & Pan, F. (2017). The role of Al content on deformation behavior and related texture evolution during hot rolling of Mg-Al-Zn alloys. Journal of Alloys and Compounds, 695, 396–403. doi:View 10.1016/j.jallcom.2016.10.222
• Järvenpää, A., Jaskari, M., Man, J., & Karjalainen, L. P. (2017). Austenite stability in reversion-treated structures of a 301LN steel under tensile loading. Materials Characterization, 127, 12–26. doi:View 10.1016/j.matchar.2017.01.040
• Korneva, A., Straumal, B., Kilmametov, A., Chulist, R., & Straumal, P. (2016). Phase transformations in a Cu-Cr alloy induced by high pressure torsion. Materials Characterization. 114, 151–156. doi:View 10.1016/j.matchar.2016.02.017
• Kouadri-henni, A., Seang, C., Malard, B., & Klosek, V. (2017). Residual stresses induced by laser welding process in the case of a dual-phase steel DP600 : Simulation and experimental approaches. Materials & Design, 123, 89–102. doi:View 10.1016/j.matdes.2017.03.022
• Liu, S., & Gavrus, A. (2017). Numerical simulation and experimental investigation on the residual stresses in a laser beam welded dual phase DP600 steel plate, Thermo-mechanical material plasticity model. International Journal of Mechanical Sciences, 122(November 2016), 235–243. doi:View 10.1016/j.ijmecsci.2017.01.006
• Miszczyk, M. M., Paul, H., Driver, J. H., & Poplewska, J. (2017). The influence of deformation texture on nucleation and growth of cube grains during primary recrystallization of AA1050 alloy. Acta Materialia, 129, 378–387. doi:View 10.1016/j.actamat.2017.03.004
• Panigrahi, A., Sulkowski, B., Waitz, T., Ozaltin, K., Chrominski, W., Pukenas, A., & Horky, J. (2016). Mechanical properties , structural and texture evolution of biocompatible Ti – 45Nb alloy processed by severe plastic deformation. Journal of the Mechanical Behavior of Biomedical Materials, 62, 93–105. doi:View 10.1016/j.jmbbm.2016.04.042
• Patra, A., Saxena, R., Karak, S. K., Laha, T., & Sahoo, S. K. (2017). Fabrication and characterization of nano-Y2O3 dispersed W-Ni-Mo and W-Ni-Ti-Nb alloys by mechanical alloying and spark plasma sintering. Journal of Alloys and Compounds, 707, 245–250. doi:View 10.1016/j.jallcom.2016.11.424
• Ren, Y., Zhang, X., Xia, T., Sun, Q., & Liu, Q. (2017). Microstructural and textural evolution of high- purity titanium under dynamic loading.Materials & Design, 126 (April), 123–134. doi:View 10.1016/j.matdes.2017.04.042
• Riedl, H., Koller, C. M., Munnik, F., Hutter, H., Martin, F. M., Rachbauer, R., Mayrhofer, P. H. (2016). Influence of oxygen impurities on growth morphology, structure and mechanical properties of Ti–Al–N thin films. Thin Solid Films, 603, 39–49. doi:View 10.1016/j.tsf.2016.01.039
• Rogal, Ł. (2017). Semi-solid processing of the CoCrCuFeNi high entropy alloy. Materials & Design, 119, 406–416. doi:View 10.1016/j.matdes.2017.01.082
• Sahoo, S. K., Sabat, R. K., Panda, S., Mishra, S. C., & Suwas, S. (2017). Texture and microstructure evolution of pure zinc during rolling at liquid nitrogen temperature and subsequent annealing. Materials Characterization, 123, 218–226. doi:View 10.1016/j.matchar.2016.11.030
• Sahoo, S. K., Sabat, R. K., Sahni, S., & Suwas, S. (2016). Texture and microstructure evolution of commercially pure titanium during hot rolling : Role of strain-paths. JMADE, 91, 58–71. doi:View 10.1016/j.matdes.2015.11.073
• Shao, Y., Tang, T., Li, D., Zhou, G., Zhang, S., & Peng, Y. (2016). Polycrystal modeling of hot extrusion texture of AZ80 magnesium alloy. Transactions of Nonferrous Metals Society of China, 26(4), 1063–1072. doi:View 10.1016/S1003-6326(16)64203-6
• Sharma, A., Chhangani, S., Madhavan, R., & Suwas, S. (2017). Correlation between crystallographic texture, microstructure and magnetic properties of pulse electrodeposited nanocrystalline Nickel–Cobalt alloys. Journal of Magnetism and Magnetic Materials, 434, 68–77. doi:View 10.1016/j.jmmm.2016.12.146
• Sharma, A., Mohan, S., & Suwas, S. (2016). Structural, microstructural and magnetic investigations on the epitaxially grown Ni 2 MnGa (010) films on MgO (100) substrate. Intermetallics, 77, 6–13. doi:View 10.1016/j.intermet.2016.06.009
• Singh, J., Mahesh, S., Roy, S., Kumar, G., Srivastava, D., Dey, G. K., Samajdar, I. (2016). A miniature physical simulator for pilgering. Journal of Materials Processing Tech., 237, 126–138. doi:View 10.1016/j.jmatprotec.2016.06.009
• Singh, J., Mahesh, S., Roy, S., Kumar, G., Srivastava, D., Dey, G. K., Samajdar, I. (2017). Temperature dependence of work hardening in sparsely twinning zirconium. Acta Materialia, 123, 337–349. doi:View 10.1016/j.actamat.2016.10.049
• Srinivasan, N., Velmurugan, R., Kumar, R., & Kumar, S. (2016). Deformation behavior of commercially pure ( CP ) titanium under equi-biaxial tension. Materials Science & Engineering A, 674, 540–551. doi:View 10.1016/j.msea.2016.08.018
• Tanaka, M., Kitaoka, S., Yoshida, M., Sakurada, O., Hasegawa, M., Nishioka, K., & Kagawa, Y. (2017). Structural stabilization of EBC with thermal energy reflection at high temperatures. Journal of the European Ceramic Society, 1, 1–7. doi:View 10.1016/j.jeurceramsoc.2017.04.055
• Uniwersa, A., Wróbel, M., Wierzbanowski, K., Wroński, S., Wroński, M., Kalemba-Rec I., Sak T., Bacroix, B. (2016). Microstructure, texture and mechanical characteristics of asymmetrically rolled polycrystalline copper. Materials Characterization, 118, 575–583. doi:View 10.1016/j.matchar.2016.07.004
• Wang, L. X., Chen, X. P., Chen, D., Sun, H. F., & Liu, Q. (2016). Effect of preferential orientation on the annealing twins during the low temperature treatment in nickel. Materials Science & Engineering A, 676, 48–55. doi:View 10.1016/j.msea.2016.08.092
• Yokoi, T., Yamaguchi, N., Tanaka, M., Yokoe, D., Kato, T., Kitaoka, S., & Takata, M. (2017). Preparation of a dense ytterbium disilicate layer via dual electron beam physical vapor deposition at high temperature. Materials Letters, 193, 176–178. doi:View 10.1016/j.matlet.2017.01.085
• M.H. Shaeri, M.T. Salehi, S.H. Seyyedein, M.R. Abutalebi, J.K. Park, Characterization of microstructure and deformation texture during equal channel Angular pressing of Al-Zn-Mg-Cu alloy, J. Alloys Compd. 576 (2013) 350–357. doi:View 10.1016/j.jallcom.2013.05.182
• M.H. Shaeri, M. Shaeri, M.T. Salehi, S.H. Seyyedein, F. Djavanrodi, Microstructure and texture evolution of Al-7075 alloy processed by equal channel angular pressing, Trans. Nonferrous Met. Soc. China. 25 (2015) 1367–1375. doi:View 10.1016/S1003-6326(15)63735-9
• R. Madhavan, R.K. Ray, S. Suwas, Texture transition in cold-rolled nickel-40 wt.% cobalt alloy, Acta Mater. 74 (2014) 151–164. doi:View 10.1016/j.actamat.2014.03.066
• L. Znaidi, T. Chauveau, A. Tallaire, F. Liu, M. Rahmani, V. Bockelee, et al., Textured ZnO thin films by sol–gel process: Synthesis and characterizations, Thin Solid Films. (2015). doi:View 10.1016/j.tsf.2015.12.031
• A. V. Podolskiy, C. Mangler, E. Schafler, E.D. Tabachnikova, M.J. Zehetbauer, Microstructure and mechanical properties of high purity nanostructured titanium processed by high pressure torsion at temperatures 300 and 77 K, J. Mater. Sci. 48 (2013) 4689–4697. doi:View
• C. Gérard, G. Cailletaud, B. Bacroix, Modeling of latent hardening produced by complex loading paths in FCC alloys, Int. J. Plast. 42 (2013) 194–212. doi:View 10.1016/j.ijplas.2012.10.010
• S.K. Hwang, H.M. Baek, J.W. Lee, I.-H. Son, Y.-T. Im, C.M. Bae, The effect of microstructure and texture evolution on mechanical properties of low carbon steel in a non-circular drawing sequence, J. Mater. Process. Technol. 214 (2014) 318–325. doi:View 10.1016/j.jmatprotec.2013.09.020
• M.M. Humane, K.S. Thool, R.K. Minz, L.A.I. Kestens, Microstructures and Textures of Hot Rolled and Hot Rolled-Normalized 2.9 % Silicon Steel Sheets, Trans. Indian Inst. Met. 68 (2014) 371–381. doi:View 10.1007/s12666-014-0465-9
• S.K. Hwang, H.M. Baek, Y.T. Im, I.H. Son, C.M. Bae, H.W. Lee, The effect of grain refinement by multi-pass continuous hybrid process on mechanical properties of low-carbon steel wires, J. Mater. Process. Technol. 214 (2014) 1398–1407. doi:View 10.1016/j.jmatprotec.2014.02.001
• O. Renk, A. Hohenwarter, S. Wurster, R. Pippan, Direct evidence for grain boundary motion as the dominant restoration mechanism in the steady-state regime of extremely cold-rolled copper, Acta Mater. 77 (2014) 401–410. doi:View 10.1016/j.actamat.2014.06.010
• K. Lukaszkowicz, L.A. Dobrzański, Structure and mechanical properties of gradient coatings deposited by PVD technology onto the X40CrMoV5-1 steel substrate, J. Mater. Sci. 43 (2008) 3400–3407. doi:View 10.1007/s10853-008-2523-3
• N.P. Gurao, S. Sethuraman, S. Suwas, Evolution of texture and microstructure in commercially pure titanium with change in strain path during rolling, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44 (2013) 1497–1507. doi:View 10.1007/s11661-012-1484-y
• Q.H. Bui, X.T. Pham, M. Fafard, Modelling of microstructure effects on the mechanical behavior of aluminium tubes drawn with different reduction areas, Int. J. Plast. 50 (2013) 127–145. doi:View 10.1016/j.ijplas.2013.04.005
• J. Singh, S. Mahesh, G. Kumar, P. Pant, D. Srivastava, G.K. Dey, et al., Texture Development and Plastic Deformation in a Pilgered Zircaloy-4 Tube, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 46 (2015) 1927–1947. doi:View 10.1007/s11661-015-2807-6
• R.K. Islamgaliev, V.D. Sitdikov, K.M. Nesterov, a. V. Ganeev, E. V. Bochkova, Microstructure and crystallographic texture of titanium subjected to combined severe plastic deformation processing, Russ. Metall. 2014 (2014) 234–240. doi:View 10.1134/S0036029514030136
• W. Wang, A.L. Helbert, F. Brisset, M.H. Mathon, T. Baudin, Monte Carlo simulation of primary recrystallization and annealing twinning, Acta Mater. 81 (2014) 457–468. doi:View 10.1016/j.actamat.2014.08.032
• W. Heinz, W. Robl, G. Dehm, Influence of initial microstructure on thermomechanical fatigue behavior of Cu films on substrates, Microelectron. Eng. 137 (2015) 5–10. doi:View 10.1016/j.mee.2014.10.024
• C. Mondal, A.K. Singh, A.K. Mukhopadhyay, K. Chattopadhyay, Effects of different modes of hot cross-rolling in 7010 aluminum alloy: Part I. evolution of microstructure and texture, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44 (2013) 2746–2763. doi:View 10.1007/s11661-013-1626-x
• K. Yoshida, A. Ishii, Y. Tadano, Work-hardening behavior of polycrystalline aluminum alloy under multiaxial stress paths, Int. J. Plast. 53 (2014) 17–39. doi:View 10.1016/j.ijplas.2013.07.003
• P. Manda, P. Ghosal, U. Chakkingal, A.K. Singh, Effect of Alloying Elements in Hot-Rolled Metastable b -Titanium Alloys : Part I . Evolution of Microstructure and Texture, (n.d.). doi:View 10.1007/s11661-015-2814-7
• A. Kauffmann, J. Freudenberger, H. Klauss, V. Klemm, W. Schillinger, V. Subramanya Sarma, et al., Properties of cryo-drawn copper with severely twinned microstructure, Mater. Sci. Eng. A. 588 (2013) 132–141. doi:View 10.1016/j.msea.2013.09.022
• T.I. Ivankina, S. Matthies, On the development of the quantitative texture analysis and its application in solving problems of the Earth sciences, Phys. Part. Nucl. 46 (2015) 366–423. doi:View 10.1134/S1063779615030077
• A. Góral, M. Nowak, K. Berent, B. Kania, Influence of current density on microstructure and properties of electrodeposited nickel-alumina composite coatings, J. Alloys Compd. 615 (2014) S406–S410. doi:View 10.1016/j.jallcom.2014.01.025
• H.Y. Fan, S.F. Liu, Y. Guo, C. Deng, Q. Liu, Quantifying the effects of surface quality on texture measurements of tantalum, Appl. Surf. Sci. 339 (2015) 15–21. doi:View 10.1016/j.apsusc.2015.01.216
• P. Ghosh, A.H. Chokshi, Size Effects on Strength in the Transition from Single-to-Polycrystalline Behavior, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 46 (2015) 5671–5684. doi:View 10.1007/s11661-015-3174-z
• N. Stanford, R.K.W. Marceau, M.R. Barnett, The effect of high yttrium solute concentration on the twinning behaviour of magnesium alloys, Acta Mater. 82 (2015) 447–456. doi:View 10.1016/j.actamat.2014.09.022
• D. Rodriguez-Galan, I. Sabirov, J. Segurado, Temperature and stain rate effect on the deformation of nanostructured pure titanium, Int. J. Plast. 70 (2015) 191–205. doi:View 10.1016/j.ijplas.2015.04.002
• M. Zieliński, Effects of constant magnetic field on the electrodeposition reactions and cobalt-tungsten alloy structure, Mater. Chem. Phys. 141 (2013) 370–377. doi:View 10.1016/j.matchemphys.2013.05.025
• S. Roy, S. Suwas, Microstructure and texture evolution during sub-transus thermomechanical processing of Ti-6Al-4V-0.1B alloy: Part I. Hot rolling in (α+β) phase field, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44 (2013) 3303–3321. doi:View 10.1007/s11661-013-1672-4
• G. Dirras, T. Chauveau, A. Abdul-Latif, S. Ramtani, Q.-H. Bui, Microstructure characterization of high-purity aluminum processed by dynamic severe plastic deformation, Phys. Status Solidi. 207 (2010) 2233–2237. doi:View 10.1002/pssa.201026093
• V.D. Sitdikov, I.V. Alexandrov, Computer modeling of texture formation processes in Ti Grade 4 during continuous equal channel angular pressing, Comput. Mater. Sci. 76 (2013) 65–71. doi:View 10.1016/j.commatsci.2013.03.034
• M. Palit, S. Banumathy, A.K. Singh, S. Pandian, K. Chattopadhyay, Orientation Selection and Microstructural Evolution in Directionally Solidified Tb0.3Dy0.7Fe1.95, Metall. Mater. Trans. A. (2016) 0–10. doi:View 10.1007/s11661-016-3345-6
• A. Eschke, J. Scharnweber, C.G. Oertel, W. Skrotzki, T. Marr, J. Romberg, et al., Texture development in Ti/Al filament wires produced by accumulative swaging and bundling, Mater. Sci. Eng. A. 607 (2014) 360–367. doi:View 10.1016/j.msea.2014.04.003
• G. Zhou, M.K. Jain, P. Wu, Y. Shao, D. Li, Y. Peng, Experiment and crystal plasticity analysis on plastic deformation of AZ31B Mg alloy sheet under intermediate temperatures: How deformation mechanisms evolve, Int. J. Plast. 79 (2016) 19–47. doi:View 10.1016/j.ijplas.2015.12.006
• K.S. Suresh, M. Geetha, C. Richard, J. Landoulsi, H. Ramasawmy, S. Suwas, et al., Effect of equal channel angular extrusion on wear and corrosion behavior of the orthopedic Ti-13Nb-13Zr alloy in simulated body fluid, Mater. Sci. Eng. C. 32 (2012) 763–771. doi:View 10.1016/j.msec.2012.01.022
• M. Naderi, M. Peterlechner, E. Schafler, S. V. Divinski, G. Wilde, Kinetic, volumetric and structural effects induced by liquid Ga penetration into ultrafine grained Al, Acta Mater. 99 (2015) 196–205. doi:View 10.1016/j.actamat.2015.07.061
• K.H. Oh, J.S. Jeong, Y.M. Koo, D.N. Lee, The evolution of the rolling and recrystallization textures in cold-rolled Al containing high Mn austenitic steels, Mater. Chem. Phys. 161 (2014) 9–18. doi:View 10.1016/j.matchemphys.2015.04.019
• A. Polyakov, D. Gunderov, V. Sitdikov, R. Valiev, I. Semenova, I. Sabirov, Physical Simulation of Hot Rolling of Ultra-fine Grained Pure Titanium, Metall. Mater. Trans. B. 45 (2014) 2315–2326. doi:View 10.1007/s11663-014-0133-9
• L. Farbaniec, A. Abdul-Latif, J. Gubicza, G. Dirras, High purity ultrafine-grained nickel processed by dynamic plastic deformation: Microstructure and mechanical properties, Adv. Eng. Mater. 14 (2012) 1027–1033. doi:View 10.1002/adem.201200034
• K.S. Suresh, A.D. Rollett, S. Suwas, Evolution of microstructure and texture during deformation and recrystallization of heavily rolled Cu-Cu multilayer, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 44 (2013) 3866–3881. doi:View 10.1007/s11661-013-1749-0
• A.S. Taylor, M. Weiss, T. Hilditch, N. Stanford, P.D. Hodgson, Formability of cryo-rolled aluminium in uniaxial and biaxial tension, Mater. Sci. Eng. A. 555 (2012) 148–153. doi:View 10.1016/j.msea.2012.06.044
• Z. Chen, N. Prud’homme, B. Wang, P. Ribot, V. Ji, Microstructure characterization and deposition mechanism studies of zrO2 thin films deposited by LI-MOCVD, Surf. Coatings Technol. 218 (2013) 7–16. doi:View 10.1016/j.surfcoat.2012.12.017
• T. Bhattacharjee, B.C. Suh, T.T. Sasaki, T. Ohkubo, N.J. Kim, K. Hono, High strength and formable Mg-6.2Zn-0.5Zr-0.2Ca alloy sheet processed by twin roll casting, Mater. Sci. Eng. A. 609 (2014) 154–160. doi:View 10.1016/j.msea.2014.04.058
• M. Andasmas, T. Chauveau, N. Fagnon, D. Vrel, Synthesis of NiAl intermetallics from cold-extruded samples, Intermetallics. 32 (2013) 137–144. doi:View 10.1016/j.intermet.2012.08.019
• A. Kratzig, C. Zachaus, S. Brunken, D. Thomas, P. Bogdanoff, K. Ellmer, et al., RuS2 thin films as oxygen-evolving electrocatalyst: Highly oriented growth on single-crystal FeS2 substrate and their properties compared to polycrystalline layers, Phys. Status Solidi Appl. Mater. Sci. 211 (2014) 2020–2029. doi:View 10.1002/pssa.201431284
• S.T. Aruna, S. Roy, A. Sharma, G. Savitha, V.K. William Grips, Cost-effective wear and oxidation resistant electrodeposited Ni-pumice coating, Surf. Coatings Technol. 251 (2014) 201–209. doi:View 10.1016/j.surfcoat.2014.04.026
• A. Kouadri-Henni, L. Barrallier, Mechanical properties, microstructure and crystallographic texture of magnesium AZ91-D alloy welded by friction stir welding (FSW), Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 45 (2014) 4983–4996. doi:View 10.1007/s11661-014-2381-3
• N.P. Gurao, R. Kapoor, S. Suwas, Texture evolution in high strain rate deformed Cu-10Zn alloy, Mater. Sci. Eng. A. 558 (2012) 761–765. doi:View 10.1016/j.msea.2012.07.112
• K. Velmanirajan, A.S.A. Thaheer, R. Narayanasamy, R. Madhavan, S. Suwas, Effect of annealing temperature in Al 1145 alloy sheets on formability, void coalescence, and texture analysis, J. Mater. Eng. Perform. 22 (2013) 1091–1107. doi:View 10.1007/s11665-012-0358-1
• H.P. Lin, T.S. Ng, C.L. Chen, J.C. Kuo, S.X. Ding, Comparison of deformation texture in FePd alloy via X-ray diffraction and electron backscatter diffraction techniques, Micron. 44 (2013) 433–441. doi:View 10.1016/j.micron.2012.09.009
• A. Eschke, W. Zinn, T. Marr, C.G. Oertel, W. Skrotzki, L. Schultz, et al., Local stress gradients in Ti/Al composite wires determined by two-dimensional X-ray microdiffraction, Mater. Sci. Eng. A. 616 (2014) 44–54. doi:View 10.1016/j.msea.2014.08.003
• K.J. Martinschitz, R. Daniel, C. Mitterer, J. Keckes, Elastic constants of fibre-textured thin films determined by X-ray diffraction, J. Appl. Crystallogr. 42 (2009) 416–428. doi:View 10.1107/S0021889809011807
• B.C. Maji, M. Krishnan, A. Verma, R. Basu, I. Samajdar, R.K. Ray, Effect of Pre-straining on the Shape Recovery of Fe-Mn-Si-Cr-Ni Shape Memory Alloys, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 46 (2014) 639–655. doi:View 10.1007/s11661-014-2645-y
• N.P. Gurao, P. Kumar, A. Sarkar, H.G. Brokmeier, S. Suwas, Simulation of deformation texture evolution during multi axial forging of interstitial free steel, J. Mater. Eng. Perform. 22 (2013) 1004–1009. doi:View 10.1007/s11665-012-0388-8
• A.O.F. Hayama, J.F.S.C. Lopes, M.J. Gomes da Silva, H.F.G. Abreu, R. Caram, Crystallographic texture evolution in Ti-35Nb alloy deformed by cold rolling, Mater. Des. 60 (2014) 653–660. doi:View 10.1016/j.matdes.2014.04.024
• S. Bera, S. Ghosh Chowdhury, W. Lojkowsky, I. Manna, Synthesis of CuCr and CuCrAg alloys with extended solid solubility with nano-Al 2O 3 dispersion by mechanical alloying and consolidation by high pressure sintering, Mater. Sci. Eng. A. 558 (2012) 298–308. doi:View 10.1016/j.msea.2012.08.004
• S. Biswas, S. Suwas, Evolution of sub-micron grain size and weak texture in magnesium alloy Mg-3Al-0.4Mn by a modified multi-axial forging process, Scr. Mater. 66 (2012) 89–92. doi:View 10.1016/j.scriptamat.2011.10.008
• N. Ray, G. Jagadeesh, S. Suwas, Response of shock wave deformation in AA5086 aluminum alloy, Mater. Sci. Eng. A. 622 (2015) 219–227. doi:View 10.1016/j.msea.2014.10.010
• I. Salzmann, R. Resel, STEREOPOLE: Software for the analysis of X-ray diffraction pole figures with IDL, J. Appl. Crystallogr. 37 (2004) 1029–1033. doi:View 10.1107/S002188980402165X
• J.T.Bonarski, Characterization of materials structure by X-ray diffraction, personal.imim.pl/jan.bonarski/Wyklady_JB.pdf
• K. Velmanirajan, R. Narayanasamy, K. Anuradha, Effect of chemical composition on texture using response surface methodology, J. Mater. Eng. Perform. 22 (2013) 3237–3257. doi:View 10.1007/s11665-013-0644-6
• H.M. Baek, S.K. Hwang, H.S. Joo, Y.T. Im, I.H. Son, C.M. Bae, The effect of a non-circular drawing sequence on delamination characteristics of pearlitic steel wire, Mater. Des. 62 (2014) 137–148. doi:View 10.1016/j.matdes.2014.05.014
• J. Gravier, V. Vignal, S. Bissey-Breton, Influence of residual stress, surface roughness and crystallographic texture induced by machining on the corrosion behaviour of copper in salt-fog atmosphere, Corros. Sci. 61 (2012) 162–170. doi:View 10.1016/j.corsci.2012.04.032
• C. Mondal, A.K. Singh, Effect of change of rolling planes on orientation rotation around the ??-fiber of high-purity aluminum plate subjected to 90% cold pre-deformation, Scr. Mater. 66 (2012) 674–677. doi:View 10.1016/j.scriptamat.2012.01.030
• H. Yan, X. Zhao, N. Jia, Y. Zheng, T. He, Influence of shear banding on the formation of brass-type textures in polycrystalline fcc metals with low stacking fault energy, J. Mater. Sci. Technol. 30 (2014) 408–416. doi:View 10.1016/j.jmst.2013.11.010
• T. Goryczka, B. Szaraniec, Characterization of polylactide layer deposited on Ni-Ti shape memory alloy, J. Mater. Eng. Perform. 23 (2014) 2682–2686. doi:View 10.1007/s11665-014-1038-0
• S. Roy, G. Kannan, S. Suwas, M.K. Surappa, Effect of extrusion ratio on the microstructure, texture and mechanical properties of (Mg/AZ91)m-SiCp composite, Mater. Sci. Eng. A. 624 (2015) 279–290. doi:View 10.1016/j.msea.2014.10.063
• W. Skrotzki, A. Eschke, J. Romberg, J. Scharnweber, T. Marr, R. Petters, et al., Processing of high strength light-weight metallic composites, Adv. Eng. Mater. 16 (2014) 1208–1216. doi:View 10.1002/adem.201400190
• P. Angerer, J.M. Lackner, M. Wiessner, G.A. Maier, Chromium/chromium nitride multilayers during thermal treatment: An X-ray diffraction study, Int. J. Refract. Met. Hard Mater. 36 (2013) 101–105. doi:View 10.1016/j.ijrmhm.2012.07.008
• S. Panda, S.K. Sahoo, A. Dash, M. Bagwan, G. Kumar, S.C. Mishra, et al., Orientation dependent mechanical properties of commercially pure (cp) titanium, Mater. Charact. 98 (2014) 93–101. doi:View 10.1016/j.matchar.2014.10.011
• B.C. De Cooman, J. Kim, S. Lee, Heterogeneous deformation in twinning-induced plasticity steel, Scr. Mater. 66 (2012) 986–991. doi:View 10.1016/j.scriptamat.2012.02.028
• D. V. Gunderov, A. V. Polyakov, I.P. Semenova, G.I. Raab, A.A. Churakova, E.I. Gimaltdinova, et al., Evolution of microstructure, macrotexture and mechanical properties of commercially pure Ti during ECAP-conform processing and drawing, Mater. Sci. Eng. A. 562 (2013) 128–136. doi:View 10.1016/j.msea.2012.11.007
• V. Anil Kumar, R.K. Gupta, G. Sudarsana Rao, Solution Treatment and Aging (STA) Study of Ti Alloy Ti5Al3Mo1.5V, J. Mater. Eng. Perform. 24 (2015) 24–31. doi:View 10.1007/s11665-014-1294-z
• E. Matykina, R. Arrabal, R.Z. Valiev, J.M. Molina-Aldareguia, P. Belov, I. Sabirov, Electrochemical Anisotropy of Nanostructured Titanium for Biomedical Implants, Electrochim. Acta. 176 (2015) 1221–1232. doi:View 10.1016/j.electacta.2015.07.128
• Z. Chen, J. Li, A. Borbely, G. Ji, S.Y. Zhong, Y. Wu, et al., The effects of nanosized particles on microstructural evolution of an in-situ TiB2/6063Al composite produced by friction stir processing, Mater. Des. 88 (2015) 999–1007. doi:View 10.1016/j.matdes.2015.09.127
• A. Kauffmann, J. Freudenberger, H. Klauß, W. Schillinger, V. Subramanya Sarma, L. Schultz, Efficiency of the refinement by deformation twinning in wire drawn single phase copper alloys, Mater. Sci. Eng. A. 624 (2015) 71–78. doi:View 10.1016/j.msea.2014.11.052
• A. Wauthier-Monnin, T. Chauveau, O. Castelnau, H. Réglé, B. Bacroix, The evolution with strain of the stored energy in different texture components of cold-rolled if steel revealed by high resolution X-ray diffraction, Mater. Charact. 104 (2015) 31–41. doi:View 10.1016/j.matchar.2015.04.005
• S.V.S. Narayana Murty, N. Nayan, R. Madhavan, S.C. Sharma, K.M. George, S. Suwas, Analysis of Microstructure and Texture Evolution in Mg-3Al-1Zn Alloy Processed Through Groove Rolling, J. Mater. Eng. Perform. 24 (2015) 2091–2098. doi:View 10.1007/s11665-015-1459-4
• E. Shinada, T. Nagoshi, T.F.M. Chang, M. Sone, Crystallographic study on self-annealing of electroplated copper at room temperature, Mater. Sci. Semicond. Process. 16 (2013) 633–639. doi:View 10.1016/j.mssp.2012.11.011
• H. Qin, X. Zhang, Q. Dong, Microstructure and texture evolution for dynamic plastic deformed pure magnesium during isothermal annealing, Mater. Sci. Eng. A. 626 (2015) 94–101. doi:View 10.1016/j.msea.2014.12.037
• P. Chekhonin, B. Beausir, J. Scharnweber, C.G. Oertel, T. Hausöl, H.W. Höppel, et al., Confined recrystallization of high-purity aluminium during accumulative roll bonding of aluminium laminates, Acta Mater. 60 (2012) 4661–4671. doi:View 10.1016/j.actamat.2012.04.004
• A.P. Baumann, J.M. Deuerling, D.J. Rudy, G.L. Niebur, R.K. Roeder, The relative influence of apatite crystal orientations and intracortical porosity on the elastic anisotropy of human cortical bone, J. Biomech. 45 (2012) 2743–2749. doi:View 10.1016/j.jbiomech.2012.09.011
• T. Sadat, G. Dirras, D. Tingaud, M. Ota, T. Chauveau, D. Faurie, et al., Bulk Ni-W alloys with a composite-like microstructure processed by spark plasma sintering: Microstructure and mechanical properties, Mater. Des. 89 (2016) 1181–1190. doi:View 10.1016/j.matdes.2015.10.083
• E. Bonnot, A.L. Helbert, F. Brisset, T. Baudin, Microstructure and texture evolution during the ultra grain refinement of the Armco iron deformed by accumulative roll bonding (ARB), Mater. Sci. Eng. A. 561 (2013) 60–66. doi:View 10.1016/j.msea.2012.11.017
• S.K. Sahoo, R.K. Sabat, S. Panda, S.C. Mishra, S. Suwas, Mechanical Property of Pure Magnesium: From Orientation Perspective Pertaining to Deviation from Basal Orientation, J. Mater. Eng. Perform. 24 (2015) 2346–2353. doi:View 10.1007/s11665-015-1522-1
• G. Anand, K. Barai, R. Madhavan, P.P. Chattopadhyay, Evolution of annealing texture in cryo-rolled copper, Mater. Sci. Eng. A. 638 (2015) 114–120. doi:View 10.1016/j.msea.2015.04.034
• C. Delle Piane, B.S.G. Almqvist, C.M. MacRae, A. Torpy, A.J. Mory, D.N. Dewhurst, Texture and diagenesis of Ordovician shale from the Canning Basin, Western Australia: Implications for elastic anisotropy and geomechanical properties, Mar. Pet. Geol. 59 (2015) 56–71. doi:View 10.1016/j.marpetgeo.2014.07.017
• F. Xu, X. Zhang, H. Ni, Y. Cheng, Y. Zhu, Q. Liu, Effect of twinning on microstructure and texture evolutions of pure Ti during dynamic plastic deformation, Mater. Sci. Eng. A. 564 (2013) 22–33. doi:View 10.1016/j.msea.2012.11.097
• A.B. Rodriguez-Navarro, A. Checa, M.G. Willinger, R. Bolmaro, J. Bonarski, Crystallographic relationships in the crossed lamellar microstructure of the shell of the gastropod Conus marmoreus, Acta Biomater. 8 (2012) 830–835. doi:View 10.1016/j.actbio.2011.11.001
• M.Z. Bian, K.S. Shin, {1012} Twinning Behavior in Magnesium Single Crystal, Met. Mater. Int. 19 (2013) 999–1004. doi:View 10.1007/s12540-013-5012-4
• H.F.G. Abreu, J.J. Silva, M.R. Silva, M.J. Gomes Da Silva, Influence of reverted austenite on the texture and magnetic properties of 350 maraging steel, J. Magn. Magn. Mater. 393 (2015) 99–104. doi:View 10.1016/j.jmmm.2015.05.037
• K. Verstraete, A.L. Helbert, F. Brisset, A. Benoit, P. Poniard, T. Baudin, Microstructure, mechanical properties and texture of an AA6061/AA5754 composite fabricated by cross accumulative roll bonding, Mater. Sci. Eng. a-Structural Mater. Prop. Microstruct. Process. 640 (2015) 235–242. doi:View 10.1016/j.msea.2015.05.106
• S. Brahma, P. Jaiswal, K.S. Suresh, K.Y. Lo, S. Suwas, S.A. Shivashankar, Effect of substrates and surfactants over the evolution of crystallographic texture of nanostructured ZnO thin films deposited through microwave irradiation, Thin Solid Films. 593 (2015) 81–90. doi:View 10.1016/j.tsf.2015.09.005
• S. Bissey-Breton, V. Vignal, Influence of post-machining thermal treatment on the corrosion behaviour of copper, Procedia CIRP. 13 (2014) 120–124. doi:View 10.1016/j.procir.2014.04.021
• B. Nabi, A.L. Helbert, F. Brisset, G. André, T. Waeckerlé, T. Baudin, Effect of recrystallization and degree of order on the magnetic and mechanical properties of soft magnetic FeCo-2V alloy, Mater. Sci. Eng. A. 578 (2013) 215–221. doi:View 10.1016/j.msea.2013.04.066
• S.K. Hwang, H.M. Baek, H.S. Joo, Y.T. Im, Effect of processing routes in a multi-pass continuous hybrid process on mechanical properties, microstructure, and texture evolutions of low-carbon steel wires, Met. Mater. Int. 21 (2015) 391–401. doi:View 10.1007/s12540-015-4382-1
• Jia, N.; Roters, F.; Eisenlohr, P.; Kords, C.; Raabe, D."Non-crystallographic shear banding in crystal plasticity FEM simulations: Example of texture evolution in ?-brass", Acta Materialia, 60,3 (2012) pp. 1099-1115.
• Suresh, K.S.; Geetha, M.; Richard, C.; Landoulsi, J.; Ramasawmy, H.; Suwas, S.; Asokamani, R.,"Effect of equal channel angular extrusion on wear and corrosion behavior of the orthopedic Ti–13Nb–13Zr alloy in simulated body fluid "Materials Science & Engineering C, 32, 4, 1, (2012) pp. 763-771.
• Roy, Shibayan; D., Satyaveer Singh; Suwas, Satyam; Kumar, S.; Chattopadhyay, K.,"Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086",Materials Science & Engineering A, 528, 29-30,15 (2011) pp. 8469-8478.
• Gurao, N.P.; Sethuraman, S.; Suwas, Satyam,"Effect of strain path change on the evolution of texture and microstructure during rolling of copper and nickel", Materials Science & Engineering A, 528, 25-26, 25 (2011) pp. 7739-7750.
• Rodriguez-Navarro, Alejandro B.; Checa, Antonio; Willinger, Marc-Georg; Bolmaro, Raúl; et. al.,"Crystallographic relationships in the crossed lamellar microstructure of the shell of the gastropod Conus marmoreus", Acta Biomaterialia, 8,2 (2012) pp. 830-835.
• K.Lukaszkowicz, A.Czyzniewski,W.Kwasny,M.Pancielejko,"Structure and mechanical properties of PVD coatings deposited onto the X40CrMoV5-1 hot work tool steel substrate", Vacuum, 86, 8,29 (2012) pp. 1186-1194.
• Li Jizhong, Xu Wei, Wu Xiaolin, Ding Hua, Xia Kenong,"Effects of grain size on compressive behaviour in ultrafine grained pure Mg processed by equal channel angular pressing at room temperature", Materials Science & Engineering A, 528, 18, 15, (2011), pp. 5993-5998.
• B.C.De Cooman, Kim Jinkyung, Lee Seil,"Heterogeneous deformation in twinning-induced plasticity steel",Scripta Materialia, 66,12,(2012) pp. 986-991.
• W.J.Kim,S.J.Yoo, H.T.Jeong, D.M.Kim,B.H.Choe,J.B.Lee,"Effect of the speed ratio on grain refinement and texture development in pure Ti during differential speed rolling",Scripta Materialia, 64,1,(2011) pp. 49-52.
• Q.H,Bui, X.T.Pham,"Modeling of microstructure effects on the mechanical behavior of ultrafine-grained nickels processed by hot isostatic pressing",International Journal of Mechanical Sciences, 53, 10, (2011), pp. 812-826.
• L.Li,"Deformation band and texture of a cast Mg–RE alloy under uniaxial hot compression", Materials Science & Engineering A, 528, 24, 15, (2011), pp. 7178-7185.
• Biswas, Somjeet; Suwas, Satyam, "Evolution of sub-micron grain size and weak texture in magnesium alloy Mg–3Al–0.4Mn by a modified multi-axial forging process ", Scripta Materialia, 66, 2, (2012), pp. 89-92 .
• C.Mondal, A.K.Singh,"Effect of change of rolling planes on orientation rotation around the ß-fiber of high-purity aluminum plate subjected to 90% cold pre-deformation",Scripta Materialia,66,9,(2012) pp. 674-677.
• Yu.Ivanisenko, W.Skrotzki, R.Chulist,T.Lippmann,L.Kurmanaeva, ,,Texture development in a nanocrystalline Pd–Au alloy studied by synchrotron radiation", Scripta Materialia, 66,3-4,(2012),pp. 131-134
• CG.Oertel, R.Schaarschuch,G.H.Cao,H.N.Tian,J.Freudenberger,H.G.Brokmeier, et. al,"Effect of martensitic phase transformation on the ductility of polycrystalline YCu", Scripta Materialia, 65, 9, (2011), pp. 779-782.
• M.J.N.V.Prasad, A.H.Chokshi, Microstructural stability and superplasticity in an electrodeposited nanocrystalline Ni–P alloy, Acta Materialia Volume: 59, Issue: 10, June, 2011, pp. 4055-4067
• Jia, N.; Peng, R. Lin; Wang, Y.D.; Zhao, X., Self-consistent modeling of rolling textures in an austenitic–ferritic duplex steel, Materials Science & Engineering A, 528, 10-11, 25 (2011), pp. 3615-3624
• Biswas, Somjeet; Suwas, Satyam; Sikand, R.; Gupta, Anil K., Analysis of texture evolution in pure magnesium and the magnesium alloy AM30 during rod and tube extrusion, Materials Science & Engineering A Volume: 528, Issue: 10-11, April 25, 2011, pp. 3722-3729
• Vignal, V.; Zhang, H.; Delrue, O.; Heintz, O.; Popa, I.; Peultier, J., Influence of long-term ageing in solution containing chloride ions on the passivity and the corrosion resistance of duplex stainless steels, Corrosion Science Volume: 53, Issue: 3, March, 2011, pp. 894-903
• Khatirkar, Rajesh K.; Kumar, Sunil, Comparison of recrystallization textures in interstitial free and interstitial free high strength steels, Materials Chemistry and Physics Volume: 127, Issue: 1-2, May 16, 2011, pp. 128-136
• Andasmas, M.; Langlois, P.; Fagnon, N.; Chauveau, Th.; Hendaoui, A.; Vrel, D. Phenomenological study of the densification behavior of Aluminum–Nickel powder mixtures during cold isostatic pressing and differential hydrostatic extrusion, Powder Technology Volume: 207, Issue: 1-3, February 15, 2011, pp. 304-310
• Kim, W.J.; Yoo, S.J.; Jeong, H.T.; Kim, D.M.; Choe, B.H.; Lee, J.B., Effect of the speed ratio on grain refinement and texture development in pure Ti during differential speed rolling, Scripta Materialia Volume: 64, Issue: 1, January, 2011, pp. 49-52
• V.D.Hiwarkar; S.K.Sahoo;, I. Samajdar; A.Satpathy; K.V.Krishna Mani; G.K.Dey; D.Srivastav; et. al., Defining recrystallization in pilgered Zircaloy-4: From preferred nucleation to growth inhibition, Journal of Nuclear Materials Volume: 412, Issue: 3, May 31, 2011, pp. 287-293 2005 - 2010
• L. Tarkowski a, J. Bonarski, I. Alexandrov, Planar irregularities of texture and stress field in Ti detected by X-ray diffraction technique, Nuclear Instruments and Methods in Physics Research B 268 (2010) 352–355.
• G. Dirras, H. Couque, J. Gubicza, A. Ouarem, T. Chauveau, P. Jenei, Fine-grained nickel deformed by direct impact at different velocities, Microstructure and mechanical properties, Materials Science and Engineering A 527 (2010) 4128–4135.
• S.K. Sahoo, V.D. Hiwarkar, L. Jain, I. Samajdar, P. Pant, G.K. Dey, D. Srivastav R. Tewari, S. Banerjee, Deformed microstructures of two-phase Zr–2.5Nb alloy: Effects of the second phase hardness, Journal of Nuclear Materials 404 (2010) 222-230.
• R. Chulist,W.Skrotzki,C.-G.Oertel,A.Bohm,T.Lippmann, E.Rybacki, Microstructure and texture in Ni50Mn29Ga21 deformed by high-pressure torsion, Scripta Materialia 62 (2010) 650–653. J. Arout Chelvane, S. Banumathy, Mithun Palit, Himalay Basumatary, A.K. Singh, S. Pandian, Texture and magnetostriction studies in Bridgman solidified Ho0.85Tb0.15Fe1.95 alloys, Journal of Alloys and Compounds 507 (2010) 162–166.
• Li Li, Xinming Zhang, Changping Tang, Yunlai Deng, Nan Zhou, Mechanical properties and deep drawability of Mg–Gd–Y–Zr alloy rolling sheet at elevated temperatures, Materials Science and Engineering A 527 (2010) 1266–1274.
• R. Chulist,W. Skrotzki,C.-G. Oertel,A.Bohmb, M.Potschke, Change in microstructure during training of a Ni50Mn29Ga21 bicrystal, Scripta Materialia 63 (2010) 548–551.
• R. Dakhlaoui,V. Klosek,M.H. Mathon,B. Marini, Orientation stress field analysis in polycrystalline bcc steel using neutron diffraction, Acta Materialia 58 (2010) 499–509.
• Akinobu Shibata,Homuro Noda,Masato Sone,Yakichi Higo, Thin Solid Films 518 (2010) 5153–5158.
• W.J. Kim, S.J. Yoo, H.T. Jeong, D.M. Kim, B.H. Choe and J.B. Lee, Effect of the speed ratio on grain refinement and texture development in pure Ti during differential speed rolling, Scripta Materialia 64 (2011) 49–52.
• A. Chakraborty,M.Dutta,R.Pais,R.K.Ray,Analysis of an uncommon coating defect on industrial galvannealed high strength interstitial free steel, Surface & Coatings Technology 204 (2010) 3481–3489.
• B. Ravi Kumar, S.K. Das, Sailaja Sharma, J.K. Sahu, Effect of thermal cycles on heavily cold deformed AISI 304L austenitic stainless steel, Materials Science and Engineering A 527 (2010) 875–882.
• Karen Pantleon, Marcel A.J. Somers, Interpretation of microstructure evolution during self-annealing and thermal annealing of nanocrystalline electrodeposits—A comparative study, Materials Science and Engineering A 528 (2010) 65–71.
• Nicole Stanford, Dale Atwell, Matthew R. Barnett, The effect of Gd on the recrystallisation, texture and deformation behaviour of magnesium-based alloys, Acta Materialia 58 (2010) 6773–6783.
• M. Lederer V. Gröger, G. Khatibi, B. Weiss, Size dependency of mechanical properties of high purity aluminium foils, Materials Science and Engineering A 527 (2010) 590–599.
• M.J.N.V. Prasad , A.H. Chokshi, Superplasticity in electrodeposited nanocrystalline nickel, Acta Materialia 58 (2010) 5724–5736.
• Raghavendra R. Adharapurapu,Fengchun Jiang, John F. Bingert, Kenneth S. Vecchio, Influence of cold work and texture on the high-strain-rate response of Nitinol, Materials Science and Engineering A 527 (2010) 5255–5267.
• Mario Birkholz, "Thin Film Analysis by X-Ray Scattering", Wiley VCH, ISBN:3527607048, 227,236. Panicker, R.; Chokshi, A.H.; Mishra, R.K.; Verma, R.; Krajewski, P.E. "Microstructural evolution and grain boundary sliding in a superplastic magnesium AZ31 alloy"; Acta Materialia Volume: 57, Issue: 13 (2009) 3683-3693
• Chakraborty, A.; Ray, R.K. "Influence of microstructure and texture on the formability character of industrially produced galvannealed coatings on three interstitial free steels"; Surface & Coatings Technology Volume: 203, Issue: 13 (2009) 1756-1764
• Prasad, M.J.N.V.; Suwas, S.; Chokshi, A.H. "Microstructural evolution and mechanical characteristics in nanocrystalline nickel with a bimodal grain-size distribution" Materials Science & Engineering A Volume: 503, Issue: 1-2, (2009) 86-91.
• Kim, W.J.; Yoo, S.J.; Chen, Z.H.; Jeong, H.T. "Grain size and texture control of Mg–3Al–1Zn alloy sheet using a combination of equal-channel angular rolling and high-speed-ratio differential speed-rolling processes"; Scripta Materialia Volume: 60, Issue: 10, (2009) 897-900
• Gurao, Nilesh P.; Ali A, Ashkar; Suwas, Satyam, "Study of texture evolution in metastable ß-Ti alloy as a function of strain path and its effect on ? transformation texture"; Materials Science & Engineering A Volume: 504, Issue: 1-2, (2009) 24-35
• Sahoo, S.K.; Hiwarkar, V.D.; Majumdar, A.; Samajdar, I.; Pant, P.; Dey, G.K.; Srivastav, D.; Tiwari, R.; et. al. "Presence and absence of significant twinning: Effects on cold deformed microstructures of single phase Zircaloy 2"; Materials Science & Engineering A Volume: 518, Issue: 1-2 (2009) 47-55. Hiwarkar, V.D.; Sahoo, S.K.; Samajdar, I.; Narasimhan, K.; Mani Krishna, K.V.; Dey, G.K.; Srivastava, D.; et. al. "Annealing of cold worked two-phase Zr-2.5 Nb—Associated microstructural developments", Journal of Nuclear Materials Volume: 384, Issue: 1, (2009) 30-37.
• Niranjani, V.L.; Hari Kumar, K.C.; Subramanya Sarma, V. "Development of high strength Al–Mg–Si AA6061 alloy through cold rolling and ageing" Materials Science & Engineering A Volume: 515, Issue: 1-2, (2009) 169-174.
• W. Skrotzki, B. Kloden, A. Lankau, R. Chulist, V. Kopylov, H.-G. Brokmeier, "Texture lnhomogeneity in Titanium Deformed by ECAP", ARCHIVES OF METALLURGY, 53 (2008) 29-32.
• Gravier, J.; Vignal, V.; Bissey-Breton, S.; Farre, J. "The use of linear regression methods and Pearson’s correlation matrix to identify mechanical–physical–chemical parameters controlling the micro-electrochemical behaviour of machined copper" Corrosion Science Volume: 50, Issue: 10, (2008) 2885-2894
• B. J. Bonarski, B. Mikulowski. E. Schafler, Ch. Holzleithner, M. J. Zehetbauer, "Crystallographic Textures of Single and Polycrystalline pure Mg and Cu Subjected to HPT Deformation", ARCHIVES OF METALLURGY, 53 (2008) 117-123.
• Li, H.; Yin, F.; Sawaguchi, T.; Ogawa, K.; Zhao, X.; Tsuzaki, K. "Texture evolution analysis of warm-rolled Fe–28Mn–6Si–5Cr shape memory alloy"; Materials Science & Engineering A Volume: 494, Issue: 1-2, (2008) 217-226
• A. Góral, J. Jura, H. Paul, "On the Orientation Characteristics in Directionally Crystallized Al-CuAl2 Eutectic Alloy", ARCHIVES OF METALLURGY, 53 (2008) 139-143.
• Yu, Z.M.; Odier, P.; Ortega, L.; Zhang, P.X.; Li, C.S.; Liu, X.H.; Zhou, L. "LZO covered Cu-based substrates"; Journal of Alloys and Compounds Volume: 460, Issue: 1-2 (2008) 519-523.
• W. 0lek, J. Bonarski, "Texture Changes in Therminally Modified Wood" ARCHIVES OF METALLURGY, 53 (2008) 207-211.
• Souza, C.M.; Abreu, H.F.G.; Tavares, S.S.M.; Rebello, J.M.A. "The ? phase formation in annealed UNS S31803 duplex stainless steel: Texture aspects" Materials Characterization Volume: 59, Issue: 9, (2008), 1301-1306.
• V. Klosek, M.H. Mathon, M.H. Aouni, R. Chiron, V. Ji, "In situ analysis of deformation mechanisms of Cu-based fcc materials under uniaxial loading", Materials Science Forum, 571-572 (2008) 89-94.
• Jiang, Z.Z.; Yu, S.H.; Chun, Y.B.; Shin, D.H.; Hwang, S.K., '"Grain refinement of pure vanadium by equal channel angular pressing", Materials Science & Engineering A, 479, 1-2 (2008) 285-292.
• Jia, N.; Lin Peng, R.; Wang, Y.D.; Johansson, S.; Liaw, P.K. "Micromechanical behavior and texture evolution of duplex stainless steel studied by neutron diffraction and self-consistent modeling ", Acta Materialia Volume: 56, 4, (2008) 782-793.
• Chun, Y.B.; Hwang, S.K., "Static recrystallization of warm-rolled pure Ti influenced by microstructural inhomogeneity", Acta Materialia 56, 3 (2008) 369-379.
• Chakraborty, A.; Bhattacharjee, D.; Pais, R.; Ray, R.K., "Effect of galvannealing power on the texture and powdering resistance of industrially produced galvannealed coating on interstitial free steel", Scripta Materialia, 57, 8 (2007) 715-718.
• Song, Jin-Hwa; Hong, Ki-Jung; Ha, Tae Kwon; Jeong, Hyo Tae, "The effect of hot rolling condition on the anisotropy of mechanical properties in Ti–6Al–4V alloy", Materials Science & Engineering A, 449-451, 25 (2007) 144-148.
• Gabriel L. Converse, Weimin Yue, Ryan K. Roeder, "Processing and tensile properties of hydroxyapatite-whisker-reinforced polyetheretherketone", Biomaterials 28 (2007) 927-935. Abstract S.B. Sadale, S.R. Barman, P.S. Patil, "Synthesis of type-II textured tungsten disulfide thin films with bismuth interfacial layer as a texture promoter", Thin Solid Films 515 (2007) 2935-2942.
• Chowdhury SG, Datta S, Kumar BR, De PK, Ghosh RN, "Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 15 (2007) 114-119.
• Jean-Marie Welter (Ed.),"Copper: Better Properties for Innovative Products", Wiley-VCH 2007. p.102.
• Patro PK, Khatirkar R, Samajdar I, Kulkarni AR, Harendranath CS, "Strontium barium niobate-relating structural developments and dielectric constant", JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 27 (5): (2007) 2255-2263.
• Tom Walde, Hermann Riedel, "Simulation of earing during deep drawing of magnesium alloy AZ31", Acta Materialia 55 (2007) 867-874
• S.B. Sadale, S.R. Barman, P.S. Patil, "Formation of _|_c texture of tungsten disulfide thin films with nickel", Applied Surface Science 253 (2007) 3489-3495.
• W.J. Kim,J.B. Lee, W.Y. Kim,H.T. Jeongb and H.G. Jeongc, "Microstructure and mechanical properties of Mg-Al-Zn alloy sheets severely deformed by asymmetrical rolling", Scripta Materialia 56 (2007) 309-312.
• B. Ravi Kumar, Mainak Ghosh "Surface and mid-plane texture evolution in austenite phase of cold rolled austenitic stainless steels",Materials Science and Engineering A 457 (2007) 236-245.
• Cedric Chauvya, Pierre Barberis, Frank Montheillet, "Microstructure transformation during warm working of beta-treated lamellar Zircaloy-4 within the upper alpha-range", Materials Science and Engineering A 431 (2006) 59-67.
• Chun, Y.B.; Semiatin, S.L.; Hwang, S.K. ''Monte Carlo modeling of microstructure evolution during the static recrystallization of cold-rolled, commercial-purity titanium'', Acta Materialia Volume: 54, Issue: 14, August, pp. 3673-3689, 2006.
• Kouadri, A.; Barrallier, L. ''Texture characterisation of hexagonal metals: Magnesium AZ91 alloy, welded by laser processing'', Materials Science & Engineering A Volume: 429, Issue: 1-2, August 15, pp. 11-17, 2006.
• Sadale, S.B.; Patil, P.S. ''Synthesis and characterization of type-II textured tungsten disulfide thin films by vdWR process with Pb interfacial layer as texture promoter'', Journal of Crystal Growth Volume: 290, Issue: 2, May 1, 2006, pp. 363-368.
• Mani K.K.V.; Sain A.; Samajdar I.; Dey, G.K.; Srivastava, D.; Neogy, S.; Tewari, R.; Banerjee, S. ''Resistance to hydride formation in zirconium: An emerging possibility'', Acta Materialia Volume: 54, Issue: 18, October, pp. 4665-4675, 2006.
• Souza J.C;Abreu,H.F.G;Teodósio,J.R, ''Comparação entre Diferentes Métodos de Cálculo da Função de Distribuição de Orientação Cristalográfica quando Aplicados em Aços Inoxidáveis Duplex'', III Workshop sobre Textura, Sao Paulo, 176-184,2006, ( On Line Access )
• I.V. Alexandrov, M.V.Zhilina, J.T. Bonarski,"Formation of texture inhomogeneity in severely plastically deformed copper", Bulletin of the Polish Academy of Sciences, Technical Sciences, Vol. 54, No 2, 2006 ( On Line Access )
• S.G.Chowdhury, E.V.Pereloma, D.B.Santos,''Evolution of Texture at the Initial Stages of Continuous Annealing of Cold Rolled Dual-Phase Steel, independent of Heating Rate'', ( On Line Access )
• Chauvy C.; Barberis P.; Montheillet F,, ''Microstructure transformation during warm working of beta-treated lamellar Zircaloy-4 within the upper alpha-range'', Materials Science & Engineering A Volume: 431, Issue: 1-2, September 15, pp. 59-67, 2006.
• Kumar, B. R.; Singh, A.K.; Mahato, B.; De, P.K.; Bandyopadhyay, N.R.; Bhattacharya, D.K. ''Deformation-induced transformation textures in metastable austenitic stainless steel'', Materials Science & Engineering A Volume: 429, Issue: 1-2, August 15, pp. 205-211, 2006.
• Chowdhury SG, Das S, Ravikumar B, ''Twinning-induced sluggish evolution of texture during recrystallization in AISI 316L stainless steel after cold rolling'', METALL MATER TRANS A 37A (8): pp. 2349-2359 AUG 2006.
• Chowdhury SG, Dutta A, Ravikumar B. Kumar A, ''Textural evolution during accumulative roll bonding of an Al-Li alloy'', MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 428 (1-2): 351-357 JUL 25 2006.
• Pantleon K.; Somers M.A.J.,"X-ray diffraction investigation of self-annealing in nanocrystalline copper electrodeposits", SCRIPTA MATERIALIA, 55 (4): pp. 283-286, 2006.
• Etter AL, Baudin T, Mathon MH, Swiatnicki W, Penelle R,"Stored energy evolution in both phases of a duplex steel as a function of cold rolling reduction",SCRIPTA MATERIALIA, 54 (4): 683-688 FEB 2006. Etter AL, Baudin T, Rey C, Penelle R, "Microstructural and textural characterization of copper processed by ECAE", MATERIALS CHARACTERIZATION 56 (1): 19-25 JAN 2006,
• Chowdhury, Sandip Ghosh; Srivastava, V.C.; Ravikumar, B.; Soren, S. "Evolution of texture during accumulative roll bonding (ARB) and its comparison with normal cold rolled aluminium–manganese alloy",Scripta Materialia Vol: 54, Issue: 9, May, 2006, pp. 1691-1696.
• Bonarski JT, Olek W, ''Crystallographic texture changes of wood due to air parameter variations'', Z KRISTALLOGR : 607-612 Part 2 Suppl. 23 2006.
• Bonarski J, Olek W, "Texture function application for wood ultrastructure description. Part 1: Theory", WOOD SCI TECHNOL 40 (2): 159-171 FEB 2006
• Goral A, Jura J, Bouzy E, Sztwiertnia K, Morgiel J, Bonarski J, ''Multiscale texture and orientation relationship investigation in Al-CuAl2 eutectic alloy'', ARCHIVES OF METALLURGY AND MATERIALS 51 (1): 11-14 2006.
• Bonarski, Jan T.,"X-ray texture tomography of near-surface areas", Progress in Materials Science Volume: 51, Issue: 1, January, 2006, pp. 61-149 1995 - 2005
• E.Zschech, M.A.Meyer,I.Zienert, E.Langer, H.Geisler, A.Preusse, P.Huebler, "Electromigration-induced copper interconnect degradation and failure: the role of microstructure", Physical and Failure Analysis of Integrated Circuits, 2005. IPFA 2005. Proceedings of the 12th International Symposium on the Physical & Failure Analysis of Integrated Circuits , pp 85- 91. Yu SH, Chun YB, Cao WQ, Kim MH, Chae SW, Kwun SI, Shin DH, Hwang SK,"Comparison of equal channel angular pressing and cold rolling in the evolution of microstructure and texture in zirconium",METALS AND MATERIALS INTERNATIONAL 11 (2): 101-111 APR 2005,
• Chun YB, Yu SH, Semiatin SL, Hwang SK,"Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium",MATERIALS SCIENCE AND ENGINEERING A. 398 (1-2): 209-219 MAY 25 2005,
• Yu SH, Chun YB, Hwang SK, Shin DH, "Texture development and Monte-Carlo simulation of microstructure evolution in pure Zr grain-refined by equal channel angular pressing",PHILOSOPHICAL MAGAZINE, 85 (2-3): 345-371 Sp. Iss. SI JAN 11 2005,
• Kim SH, You BS, Yim CD, Seo YM, "Texture and microstructure changes in asymmetrically hot rolled AZ31 magnesium alloy sheets", MATERIALS LETTERS, 59 (29-30), (2005),3876-3880.
• Blicharski M, Jura J, Baudin T, Penelle R, Bonarski J, Kowalski M, "Development of the orientation relationship between ferritic and austenitic phases during long time annealing of duplex stainless steel" ARCHIVES OF METALLURGY AND MATERIALS, 50 (2): 495-502, SI 2005
• R.Kumar, B.Mahato, N.R.Bandyopadhyay, D.K.Bhattacharya,"Comparison of rolling texture in low and medium stacking fault energy austenitic stainless steels", Materials Science & Engineering A, Vol: 394, Issue: 1-2, March 15, 2005.
• Y.B.Chun,S.H.Yu, S.L.Semiatin, S.K.Hwang,"Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium", Materials Science & Engineering A Vol: 398, Issue: 1-2, May 25, 2005.
• Alexandrov IV, Zhilina MV, Scherbakov AV, Korshunov AI, Nizovtsev PN, Smolyakov AA, Solovyev VP, Beyerlein IJ,"Texture formation during severe plastic deformation",MATERIALS SCIENCE FORUM,495-497: 785-790 Part 1&2 2005,
• M.V.Z. Zhilina, I.V. Alexandrov,J.T. Bonarski,A.V.Scherbakov,"Analysis of homogeneity of texture formation processes under high pressure torsion", ,E-MRS Fall Meeting 2005, Symposium I. Kusnierz J, Bogucka J.,"Evolution of texture during ARB processing of Al 99.8%",MATERIALS SCIENCE FORUM, 495-497: 797-802 Part 1&2 2005,
• S.H.Yu, Y.B.Chun,S.K.Hwang,D.H.Shin,"Texture development and Monte-Carlo simulation of microstructure evolution in pure Zr grain-refined by equal channel angular pressing", Philosophical Magazine, Volume 85, Numbers 2-3, 11 January-21 January 2005.
• Vogel SC, Hartig C, Von Dreele RB, Wenk HR, Williams DJ,"Quantitative texture measurements using neutron time-of-flight diffraction",MATERIALS SCIENCE FORUM, 495-497: 107-112 Part 1&2 2005,
• Tarkowski L., Bonarski J., W.Dabrowski "Application of the Si-strip detector in X-ray crystallographic texture measurements", Nuclear Inst. and Methods in Physics Research, A Volume: 551, Issue: 1, October 1, 2005, pp. 178-182.
• Zhilina MV, Bonarski J, Scherbakov AV, Alexandrov IV, Makarychev K, "Analysis of texture formation homogeneity processes during equal-channel angular pressing", ARCHIVES OF METALLURGY AND MATERIALS 50 (2), 479-485 SI 2005.
• Mizera J, Pakiela Z, Kurzydlowski KJ,"Texture and residual stresses in Ti-Al and Ti-Al-Nb alloy subjected to severe plastic deformation", ARCHIVES OF METALLURGY AND MATERIALS, 50 (2), 395-402, SI 2005.
• Espinoza Orias A.A.,"THE RELATIONSHIP BETWEEN THE MECHANICAL ANISOTROPY OF HUMAN CORTICAL BONE TISSUE AND ITS MICROSTRUCTURE", Thesis, University of Notre Dame, 2005. Kusnierz J,"Rolling texture of ECAP processed Al and Cu",TEXTURE AND ANISOTROPY OF POLYCRYSTALS II, SOLID STATE PHENOMENA, 105: 339-344 2005,
• T.Walde, H.Riedel, ''Modeling Texture Evolution during Rolling of Magnesium Alloy AZ31'', Solid State Phenomena, 105, 285-290, 2005.
• Kusnierz J, Bogucka J.,"Accumulative roll-bonding (ARB) of A199.8%",ARCHIVES OF METALLURGY AND MATERIALS", 50 (1): 219-230 2005,
• Ischia G, Wenk HR, Lutterotti L, Berberich F, "Quantitative Rietveld texture analysis of zirconium from single synchrotron diffraction images", JOURNAL OF APPLIED CRYSTALLOGRAPHY, 38: 377-380 (2) 2005.
• Chateigner D, "Reliability criteria in quantitative texture analysis with experimental and simulated orientation distributions",JOURNAL OF APPLIED CRYSTALLOGRAPHY, 38: 603-611 Part 4 AUG 2005 Kapoor K.,Lahiri D.,Rao S.V.R., Sanyal T.,Saibaba N.,Kashyap B.P.,"Texture evolution in two phase Zr – 2.5 wt-%Nb through modified route",Materials Science and Technology, October 2004, vol. 20, no. 10, pp. 1281-1289(9).
• Sarma, V. Subramanya; Eickemeyer, J.; Mickel, C.; Schultz, L.; Holzapfel, B., "On the cold rolling textures in some fcc Ni-W alloys" MATERIALS SCIENCE AND ENGINERING: A Volume: 380, Issue: 1-2, August 25, 2004, pp. 30-33
• J.L.Jones,S.C.Vogel,E.B.Slamovich, K.J.Bowman,"Quantifying texture in ferroelectric bismuth titanate ceramics", Scripta Materialia, Vol: 51, Issue: 12, December, 2004
• Jones JL, Slamovich EB, Bowman KJ, "Critical evaluation of the Lotgering degree of orientation texture indicator",JOURNAL OF MATERIALS RESEARCH, 19 (11): 3414-3422 NOV 2004,
• Wenk HR, Lonardelli I, Williams D, "Texture changes in the hcp -> bcc -> hcp transformation of zirconium studied in situ by neutron diffraction",ACTA MATERIALIA, 52 (7): 1899-1907, 2004
• Jones JL, Vogel SC, Slamovich EB, Bowman KJ, "Quantifying texture in ferroelectric bismuth titanate ceramics",SCRIPTA MATERIALIA, 51 (12): 1123-1127 DEC 2004,
• Liu JT, Morris JG, "Recrystallization microstructures and textures in AA 5052 continuous cast and direct chill cast aluminum alloy", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 385 (1-2): 342-351, 2004
• Wenk HR,"The Textures of Rocks in the Earth's Deep Interior: Part I. Understanding Anisotropy and Textures in Earth Materials", Encyclopedia of Materials: Science and Technology, Elsevier (2004);
• Li HL, Glavicic MG, Szpunar JA, "A model of texture formation in ZrO2 films", MATERIALS SCIENCE AND ENGINEERING A, 366 (1): 164-174 FEB 5 2004,
• Wenk HR, Lutterotti L, Vogel S, "Texture analysis with the new HIPPO TOF diffractometer",NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT 515 (2003) 575-588;
• Anderson PM, Bingert JF, Misra A, Hirth JP,"Rolling textures in nanoscale Cu/Nb multilayers",ACTA MATERIALIA 51 (2003) 6059-6075;
• Hayakawa Y, Kurosawa M.,"Orientation relationship between primary and secondary recrystallized texture in electrical steel", ACTA MATERIALIA 50 (18): 4527-4534 OCT 28 2002
• Liu JT, Morris JG,"Macro-, micro- and mesotexture evolutions of continuous cast and direct chill cast AA 3105 aluminum alloy during cold rolling", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 357 (2003) 277-296;
• Liu JT, Morris JG,"Texture and grain-boundary evolutions and direct chill cast AA 5052 aluminum alloy during cold rolling",METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 34A (2003) 951-966;
• Liu JT, Morris JG, "Recrystallization textures of continuous cast AA 3015 alloy: Development of the P orientation {011}< 566 >", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 34A (2003) 2029-2032;
• Kusnierz J, Bogucka J.,"Effect of ECAP processing on the properties of cold rolled copper",ARCHIVES OF METALLURGY, 48 (2): 173-182 2003,
• Kusnierz J, Baudin T, Jasienski Z, Penelle R., "Neutron and X-ray diffraction study of Al and Cu during ECA processing C and subsequent recrystallization",REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 100 (9): 825-833 SEP 2003,
• Etter AL, Mathon MH, Baudin T, Penelle R., "Stored energy evolution as a function of cold rolling reduction for a Fe-53%Ni alloy and an austenitic-ferritic steel",REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 100 (9): 851-858 SEP 2003,
• Bechade JL, Mathon MH, Branger V, Regle H, Alamo A., "Texture analysis of oxide dispersion strengthened (ODS) Fe alloys by X-ray and neutron diffraction", JOURNAL DE PHYSIQUE IV 12 (PR6): 155-163 JUL 2002,
• Kusnierz J, Kurowski M., "Strain softening enects in texture and microstructure of torsioned pre-deformed Al rods",ZEITSCHRIFT FUR METALLKUNDE, 93 (12): 1233-1236 DEC 2002, Etter AL, Mathon MH, Baudin T, Penelle R., "A method of determination of stored energy in single and dual phase cold rolled materials", TEXTURES OF MATERIALS, PTS 1 AND 2, MATERIALS SCIENCE FORUM, 408-4: 583-588 2002
• Kusnierz J, Kurowski M, Mathon MH, Baudin T, Jasienski Z, Penelle R.,"Effect of deformation path on torsion texture and stored energy of copper rods",TEXTURES OF MATERIALS, PTS 1 AND 2 MATERIALS SCIENCE FORUM, 408-4: 625-630 2002,
• Kusnierz J, Mathon MH, Baudin T, Jasienski Z, Penelle R., "Neutron diffraction study of texture and stored energy in ECA pressed copper",TEXTURES OF MATERIALS, PTS 1 AND 2, MATERIALS SCIENCE FORUM, 408-4: 703-708 2002,
• Kim BK, Szpunar JA, Varano R.,"Texture evolution in grain growth of nanocrystalline Ni",TEXTURES OF MATERIALS, PTS 1 AND 2, MATERIALS SCIENCE FORUM, 408-4: 937-942 2002
• Kim BK, Szpunar JA, Zhilyaev AP., "Annealing texture in thermal stability of ultrafine-grained Ni",TEXTURES OF MATERIALS, PTS 1 AND 2, MATERIALS SCIENCE FORUM, 408-4: 943-948 2002,
• Jura J, Baudin T, Mathon MH, Swiatnicki W, Penelle R., "Microstructure and texture analysis in a cold-rolled austenitic-ferritic steel with duplex structure",TEXTURES OF MATERIALS, PTS 1 AND 2, MATERIALS SCIENCE FORUM, 408-4: 1359-1364 2002
• Caleyo F, Baudin T, Penelle R, "Study of the development of the cube texture in Fe-50%Ni during recrystallization and normal grain growth", EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS 20 (2002) 77-89;
• Park JY, Szpunar JA, "Influence of the primary recrystallization texture on abnormal grain growth of goss grains in grain oriented electrical steels",TEXTURES OF MATERIALS, PTS 1 AND 2, MATERIALS SCIENCE FORUM, 408-4: 821-826 2002,
• Park JY, Han KS, Woo JS, Chang SK, Rajmohan N, Szpunar JA,"Influence of primary annealing condition on texture development in grain oriented electrical steels",ACTA MATERIALIA, 50 (7): 1825-1834 APR 19 2002,
• Etter AL, Mathon MH, Baudin T, Branger V, Penelle R.,"Influence of the cold rolled reduction on the stored energy and the recrystallization texture in a Fe-53%Ni alloy", SCRIPTA MATERIALIA, 46 (4): 311-317 FEB 28 2002,
• Kusnierz J., "Microstructure and texture evolving under Equal Channel Angular (ECA) processing",ARCHIVES OF METALLURGY, 46 (4): 375-384 2001.
• Starczewski L, Bonarski JT; "Stress-textural indicators of tribological wear"; MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 288 (2000) 284-287;
• Bonarski JT, Wrobel M, Pawlik K,"Quantitative phase analysis of duplex stainless steel using incomplete pole figures", MATERIALS SCIENCE AND TECHNOLOGY, 16 (2000) 657-662;
• Okuda K, Sakata K, Eloot K, Furukimi O, Obara T, "Mechanism of strong formation of {111} recrystallization texture of cold rolled IF steel sheet with {111} hot band texture", TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN 85 (8): 633-638 AUG 1999,
• Pawlowski A, Bonarski J,"Plastic deformation in Ti-46at.%Al alloy of cellular-lamellar structure",44 (1999) 267-278;
• Nowak R, Yoshida F, Morgiel J, Major B,"Postdeposition relaxation of internal stress in sputter-grown thin films caused by ion bombardment",JOURNAL OF APPLIED PHYSICS, 85 (1999) 841-852;
• Bonarski J, Pawlik K,"Development of texture determination method for the near-surface-layers",ARCHIVES OF METALLURGY, 43 (1998) 141-148;
• Komatsubara M, Hayakawa Y, Takamiya T, Muraki M, Maeda C, Ishida M, Morito N,"Newly developed grain-oriented Si-steel with thinner gauges", JOURNAL DE PHYSIQUE IV, 8 (1998) 467-474;
• Eloot K, Okuda K, Sakata K, Obara T,"Texture evolution during cold rolling and recrystallisation of IF steel with a strong {111} hot band texture";ISIJ INTERNATIONAL, 38 (1998) 602-609;
• Tarasiuk J, Wierzbanowski K, Baczmanski A,"New algorithm for the ODF calculation from pole figures",TEXTURE AND ANISOTROPY OF POLYCRYSTALS MATERIALS SCIENCE FORUM, 273-2 (1998) 133-138;
• Dutkiewicz J, Bonarski J,"Structure, texture and mechanical properties of AlZnMgCuZr alloy rolled after heat treatments",MATERIALS & DESIGN, 8 (4-6) (1997) 247-252;
• Hayakawa Y, Szpunar JA, "A comprehensive model of recrystallization for interstitial free steel",ACTA MATERIALIA 45 (1997) 3721-3730;
• Hayakawa Y, Szpunar JA,"Modeling of texture development during recrystallization of interstitial free steel",ACTA MATERIALIA 45 (1997) 2425-2434;
• Rajmohan N, Hayakawa Y, Szpunar JA, Root JH,"Neutron diffraction method for stored energy measurement in interstitial free steel",ACTA MATERIALIA 45 (1997) 2485-2494;
• Hayakawa Y, Szpunar JA,"The role of grain boundary character distribution in secondary recrystallization of electrical steels",ACTA MATERIALIA 45 (1997) 1285-1295;
• Matthies S, Lutterotti L, Wenk HR, "Advances in texture analysis from diffraction spectra",JOURNAL OF APPLIED CRYSTALLOGRAPHY, 30: 31-42 Part 1 (1997);
• Akdut N, Foct J, Gottstein G, "Cold rolling texture development of alpha/gamma duplex stainless steels",STEEL RESEARCH 67 (10) (1996) 450-455.
• N.Akdut,J.Foct, "Phase Boundaries and Deformation in High Nitrogen Duplex Stainless Steels I. - Rolling Texture Development", Scripta Metallurgica et Materiala, Vol: 32, Issue: 1, January 1, 1995 N.Akdut,J.Foct, "Phase Boundaries and Deformation in High Nitrogen Duplex Stainless Steels II. - Analysis of Deformation Mechanisms by Texture Measurements in X2 CrNiMo 22 5 (1.4462) Scripta Metallurgica et Materiala, Vol: 32, Issue: 1, January 1, 1995.
• Texture Modelling: Co-operation of LaboTex with VPSC , M.Zylina, A.Schrbakov,I.V.Alexandrov,"Computer Modelling of Processes of Texture Development in Pure Copper During Equal Channel Angular Pressing",

Blogs:

http://www.helpertex2.seesaa.net

• Blog about ODF, LaboTex and more (in Japanese)

The ODF Transformation - references:

• Adam Morawiec, Orientations and Rotations (2003), Springer, ISBN 3-540-40734-0.

The Calculation of the Volume Fraction of Texture Components. The ODF Modelling - references:

• Determination of Volume Fraction of Texture Components Using LaboTex - Integration Method (manual) - www.labotex.com
• Determination of Volume Fraction of Texture Components Using LaboTex - Model Functions Method (manual) - www.labotex.com
• Determination of Volume Fraction of Texture Components Using LaboTex - Modelling of ODF, pole figures and inverse pole figures (manual) - www.labotex.com
• J.W.Flowers, "Volume Fractions of Texture Components of Cubic Materials", Textures and Microstructures, 1983, Vol.5, pp. 205-218,"A method for obtaining volume fractions in regions about ideal texture components of cubic materials by integration of the orientation distribution function is described".
• J.H. CHO, A.D. ROLLETT, K.H. OH, "Determination of Volume Fractions of Texture Componentswith Standard Distributions in Euler Space", METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 35A, MARCH 2004—1075.
• J. Kozaczek, D. S. Kurtz, P.R. Moran, R. Martin, M. E. Gross, K. Evans-Lutterodt, "Methodology of Quantitative Texture Analysis in Thin Films and Interconnects", http://www.hypernex.com/news/pdfs/2000AdvMetfinal.PDF
• J.Jura, "Application of Model Function in Quantitative Texture Analysis of Cubic Metals", Metallurgy and Foundry Practice, Bulletin 148, No.1530,(1993).
• S.Matthies, G.W.Vinel,K.Helming,"Standard Distribution in Texture Analysis, Akademie-Verlag Berlin (1987,1988,1991).

The Measurement of Pole Figures - references:

• "Pole Figures: Registration and Plot Conventions" - www.labotex.com
• B.D. Cullity,B. D. "Elements of X-ray Diffraction", Addison-Wesley, Reading, Mass (new edition p. 402-431 Pole Figures),
• H.P. Klug, L.E.Alexander, "X-Ray Diffraction Procedures", John Wiley & Sons",
• Schulz L.G.; (1949). J.Appl. Phys., 20, 1033,
• D. Chateigner, P. Germi, M. Pernet: Texture analysis by the Schulz reflection method: defocusing corrections for thin films. J. of Applied Crystallography 25, 1992, 766-769

The Texture and Quantitative Phase Analysis - reference:

• Bonarski J.T., Wróbel M. and Pawlik K.; (2000). Quantitative phase analysis of duplex stainless steel using incomplete pole figures, Materials Science and Technology Vol. 16 No 6, p. 657-662.

The Texture and ODF - references:

• H.J. Bunge, "Texture analysis in materials science". Cuvillier Verlag, Göttingen; U.F.Kocks, C.N.Tome,H.R.Wenk, "Texture and Anisotropy", Cambridge University Press. (2000),

Others ODF/Pole Figures Resources:

• Anisotropy Overview
• Daniel Chateigner, Combined Analysis